I have same boat on the drain just go to lowes or home depot an get a shower drain cover - only thing was all the ones I found had bigger holes for the drain so you have to watch out for droping worm...
Type: Posts; User: Mike Wood
I have same boat on the drain just go to lowes or home depot an get a shower drain cover - only thing was all the ones I found had bigger holes for the drain so you have to watch out for droping worm...
I have the same boat - fought that from day one - resealed the tops of the livewells, resealed where the graph and power pole line come out of the splash well,resealed even the transom bolts and...
You can also go to Lowes or Home Depot and get a rubber plug that will fit - maybe $2.00 each.
Mgfan58 - which legend model are you going to put them in - If you try them can you post if you like them and how hard they might be to install - I'm still debating going to them - thanks
Has anyone put the Taco navigation lights into the rub rail of a 211?
Think I'd start with plain old alcohol - it should also remove any grease or wax to the new one will stick right.
Forgot - also don't buy the tool - you can get a plumbing connector at Lowes or Home Depot for less that $2 that works perfectly.
I'd say to be sure call I think Waymires is distributor for the Vault hub stuff - my initial thought is might not work - the vault system forces the grease through the spindle to the back of the...
2013 211R 59.5" at front pedestal hole, 72.25" in front of consoles, 79" at back pedestal hole. These are actual fla deck measurements.
You will love the boat - you know I'm not really concerned to much about the boat itself - likely very little issues can come up that I didn't cause - pumps can be gotten lots of places, motor isn't...
Saga begins - they took the compressor apart and said it looked fine - mercury told them to disconnect the compressor and run the engine on shop air to see if it still made the noise -waiting to hear...
Its in the shop right now - bad compressor - sure glad I had that checked before the warranty ran out - so I'll get them to check for kinks etc while they're in there.
If it was kinked I'd think it would do it every time - it does it randomly maybe a couple of times day and some days not at all - that's why the throttle deal sounded reasonable to me.
I talked to the service manager at Sartin marine - Legend dealer in the area - and he said before I go to the expense of replacing the cable to see if maybe my hotfoot wasn't letting the motor go...
I have a 2013 211 with a 250 Proxs - for some time now when I put the shift into reverse then try to move if back to neutral/forward it is very very hard to get it to move - not every time just...
Yep just keeps stuff from falling in - seems like something like that just attracts tungsten weights
Just go to lowes or home depot and get a rubber plug - that's what I used and they are cheap and fit fine.
I'm sure there is - there was for my 2013 211R
My 2013 came with a minn kota 460 (model might be wrong) - works fine biggest problem is if you want to change a battery from flooded to maybe agm you have to select the right mode on that bank and...
Only way I have is remove the bow depth finder or the plate and go in - get the bandages ready - fiberglass will look like you fought with a mountain lion after your done - very tight.
I had to replace the valve before and you are "supposed" to be able to do it through that access where the livewell pumps are but I couldn't had to pull the tank - can't be really easy so I just had...
Not a lot of room - Other boats I've had just have a large space under the dash going into the side of the boat running all the way back to the bilge but not legend -no problem pulling anything...
Going back with a hummingbird 10 - see the string on the other side of the boat - hope its there on the driver sie when I get the hds out where I can see better - gonna use one of those dash mounted...
2013 211 - Replacing an in dash mounted HDS 8 - not much room under the console so has anyone done this - any lessons learned in running the transducer and power back to the bilge -
Thanks
Pretty sure the "r" is for the higher raised rear platform and not really anything to do with the hull change in 2014. My 2013 is a 211r.