the plugs I'm running are Champion QC12PEP. I will check the capacitor this afternoon but I looked the motor over yesterday and didn't see anything leaking or corroded. I'm running a 1000CCA...
Type: Posts; User: cnealfishin
the plugs I'm running are Champion QC12PEP. I will check the capacitor this afternoon but I looked the motor over yesterday and didn't see anything leaking or corroded. I'm running a 1000CCA...
took all 6 plugs out and inspected them. All are clean and dry
Hope someone has some helpful info. I bought a 2001 Ranger with a 2000 200 Evinrude Ficht Ram last year. Motor has ran awesome ever since I purchased it but just the last 2 or 3 times I've had...
Ordered some XD100 Last night. Thanks Guys!
I've always owned Mercs and Yammies and have blown 1 of both. The chance u take when running a 2 stroke I guess. The motor runs flawless so far and plan on keeping it a while. I think doing proper...
Thanks for all the advice. I will be buying some XD50 Saturday
http://s9.tinypic.com/qzgmyb_th.jpghttp://i67.tinypic.com/2m6vgp1_th.jpg
2001 Ranger R93VS Redman Edition with 2000 Evinrude 200hp Ficht Ram with 325 hrs. I have had her a week and she runs...
Thank you very much. I spoke with another Evinrude dealer that is a little over a hr away but is very close to the ramp where I put in on the lake and he was very helpful. He told me he has both...
See I asked him that and he told me for sure not and run the XD 100. I think I will be taking it too my other dealer that is a little farther away. The guy I bought the boat from was a older guy...
Everything I'm reading tells me to run the XD 50 oil in my motor. I recently spoke with my local Johnson/Evinrude mech and XD 50 is what he told me also but he doesn't carry it. Go figure!. He...
Was the alarm that went off 4 beeps every two minutes?
I got it for $9250 but I have added HDS 5 and a couple of other things.
Ok Thanks alot.
I thought I posted it. Engine Serial # OT587103
Serial # OT587103
I have a 2002 Mercury 175EFI and I'm needing to know if this is the correct Impeller. Quicksilver Marine Part# 47-89984T 4 Impeller
I had this Impeller and the gaskets for my 03 150 XR6 and never...
2002 Super Pro 190 Dual console. 175EFI Mercury. When I bought the boat last month it was set at 4 1/8" below pad. I raised it to just slightly under 3". At the original setting I was turning a 23p...
2002 Super Pro 190 Dual console. 175EFI Mercury. When I bought the boat last month it was set at 4 1/8" below pad. I raised it to just slightly under 3". At the original setting I was turning a...
Yeah the guy I purchaed it from had put it on. I've trying raising it and can't get the bolt to turn. I think I can raise it a inch and run a 25 tempest and gain 2 or 3 mphs. Right now with setup...
I just got out of a Ranger 185 and wanted to get into a dual console boat. I was a little worried about the ride but so far it rides as good as my ranger or better but I haven't got in anything...
http://i59.tinypic.com/xgd6ix.jpghttp://i61.tinypic.com/2dwffit.jpg
2002 Procraft Super Pro 190. !75 Mercury EFI with 23p Tempest. 10" Procraft T&H Marine Jackplate, Prop Shaft 4" below pad 5800...
River Rat is correct. I had 96 S18B and I ran a 23P tempest with a 6" Jack Plate and at 5700 RPMS I could run 61-62. The boat will chine walk a little and if you can dive through it you will gain...
Speed seems to be spot on but I would agree you have a bad tach.
99 Xpress 21' dual console on Little Rock Arkansas Craigslist.
I just sold a 04 185VS with a 03 Merc 150XR6 Boat was loaded out with about the same graphs and trolling motor. Boat was in great shape but had been fished out of and I got $15,300. I would think...
