I recently dropped 35 lbs in less than 6 weeks for surgery. Lost the first 10 strictly on willpower cutting out bread and sugar and the rest while on phetermine. That stuff gives you unreal energy...
Type: Posts; User: APS
I recently dropped 35 lbs in less than 6 weeks for surgery. Lost the first 10 strictly on willpower cutting out bread and sugar and the rest while on phetermine. That stuff gives you unreal energy...
BRV5 5 blade 28 pitch balanced and blueprinted by Josh at Steve's Custom Props. Has maybe 2 hours on it. Perfect shape $1150 shipped. They're not being made anymore. Prop ran 880 and 300 for the BB.
holes need to be dished out and filled with thickened gelcoat, sanded smooth and buffed. Sometimes takes several applications to get it perfect. I'd get around $400 at my shop to do it. Hope this...
not sure if you're talking about the backing pad or buffing pads. Either way the 3m is a better product. Lakewood makes good pads too. If you plan on restoring or cutting oxidation buy some mirka...
get new boards and use a 3/4 roundover bit on a router to round all your edges. You have the nvt hull and square bunks will dig in. Put Gatorbaks on. New boards, hardware and gatorbaks are less than...
I always use 50lb braid. You can straighten a hook if you get snagged that way. A 5 wire with 1/8 oz heads runs right at 8-9 ft on a slow retrieve with 3.8 swimbaits for reference.
it shouldn't be that much for the welds, I'd get a piece of rubber and cut it to size under your rod holders like a gasket to take up any gaps.
a good buffer should do the trick. Might try a little more agressive compound.
base coat/clear coat. Most automotive paint stores have a camera that can scan your color and get a match. Most rod holders have a tube that goes downward several inches into the boat. How is that...
I've been getting alot of them lately. I text whoever it is at the start that I'm not giving any kind of report on it and then get ugly if they persist.
your jackplate height looks spot on as long as your motor is mounted in the middle holes. Just takes some seat time to keep it balanced, usually a quick correction to the left does it. Try driving...
I've tried the 3m adhesive several times on mine and it hasn't held. My trim has the bulb on top instead of the side so it has pressure on it whenever lids are closed. I've always used the 3m in my...
Just listed mine for sale here. This economy is making it tough to sell this year, already got my new one lol. At least I got a spare if something happens.
3 knots, always have a tube prerigged with about a dozen leaders with swivels and use a snap on my main line. Quick to change out leaders and just retie the snap knot when needed.
give express composites a call. a qt of clear gel, mekp, and wax additive or duratec will be under 100 bucks. Look under my fb page APS Fiberglass. I'm about to put up a 3 color flake job I just...
I'm looking for one now
hard to do it that way since it's under the middle batteries and tray. There's an area just in front of the drain plug where it goes. Sand the area real good with 80 grit, wipe with alcohol or...
you would have to have a plate welded underneath then fill and prep above area and paint with bc/cc. Not all blacks are the same.
best built in order Allison, Gambler, bullet and cat. Everything else out there is pretty equal. I do fiberglass work on them all and strictly based on bare ass hulls, there's not much difference....
HS yes, had some college. Did it matter? No I've been self employed since 83 doing body and paint work on just about everything, and now boats. I've done better than most my friends with degrees....
a small single color flake repair runs less than 400 to do correct. Any gel that sprays through a rattle can has had the hell thinned out of it. Hard to imagine getting a thick enough build to bury...
if you want it to look good get a black patch paste kit from spectrum color. Sand the area good with 80 grit and put tape around each area before applying. Sand flat when it cures and hit it with...
North up. I don't like my map spinning around. The only thing that should be moving around is your boat, the lake and land stay the same. Easy as hell to figure out which way you need to turn to get...
that doesn't look like gelcoat. Looks like someone repaired it and used auto products on it. As long as no bare glass is exposed or you have any cracks opening up I wouldn't worry about it.
got it figured out. The new mm system link wasn't plugged up to the back of gauges. Next project is figuring out how to remove the lids with lights so I can start removing carpet.
