Search:

IF you don't have the ALARM menu, change the User Mode to Custom to get all the menus.

For just navigation, you don't need any additional mapping with a Humminbird, the Humminbird base map has some contours and channel markers.
Not really much contour info is needed since there is...

The spec sonar coverage angle degrees is based on the db loss from the center of the sonar pulse. Humminbird uses -10db to rate their transducers. Don't know what Garmin uses to rate their sonar's...

When I get that, it's the battery in the remote that needs replacing.

Select the Helix 10 as the GPS source in the Helix 9's Network Source Setup menu.
If that doesn't work, you have a faulty Ethernet connection.
When a Heading Sensor is connected, the position icon...

Works great with Target Lock, just choose the Sweep mode and the MEGA LIVE will scan left/right 120 degrees. Could do somewhat the same manually with trolling motor remote control to rotate a FFS on...

It's a software glitch. Just turn the unit off and back on to clear them. May be fixed with the next software update.

Navionics

https://i.postimg.cc/13vDmKqV/Nat-Seabed.jpg

With the brace, the pod will be more susceptible to shock damage than having flex to absorb those shock loads.

If you have not noticed, there is no brace in Humminbird's accessory lists.

A Side Imaging unit will do Side Imaging, Down Imaging, and 2D sonar with a Side Imaging transducer attached.
It will do Down Imaging and 2D sonar with a Down Imaging transducer attached.
It will...

There is a cross-talk flash at the right edge Forward view
Those happen at random places on the view.

It will get warm if you have it powered and out of the water, it has a processor.

Assume nothing, try both ways. I got freeze-ups networking both.

No, except for cross-talk.

If you have APEX units you can have both networked. SlYDoggie does that.

https://i.postimg.cc/02hH9mc4/20230823-191205.jpg

With one in Landscape and the other in...

If you don't have the current Ethernet Switch, you should update that one and add another current one. AS ETH 5PGL

If you want all your stuff networked, all of your stuff connects to an Ethernet Switch.

If you don't have enough network connections, you can daisy-chain another Ethernet Switch and have 8...

You have to select the left one as the source for 2D in the right one's Sonar Source menu.

The left unit should be listed and you highlight the circle in the 2D source column.
...

Does that yellow arrow glow or the end of the pointer glow when its dark or are they battery powered light?
Makes no sense from something like that on a Minnkota that the top cap rotates and shows...

Your understanding is not correct.
SOLIX and APEX communicate at Gigabit speed with the current software. If you include an Ethernet Switch, it should be the current one that has Gigabit speed for...

Yes, I cut 5" off of mine.

Ott Defore has a video doing his using a reciprocating saw and file to protect the cables. More brutal than how it did it.

I used a Dremel thin cutoff wheel and...

You have not provided enough info to answer. Use this tool to match units and transducers---

Transducer Compatibility – Humminbird (johnsonoutdoors.com)

That square thingy---

https://i.postimg.cc/DfgZ1syY/20240408-202329.jpg

The GPS antenna is under that circle, but the GPS frequencies should pass though plastic if that is what the pointer is made of.

Don't see any provision for a voltage readout. There is a battery symbol at the top right which may have some indication of charge level, but I use LiFePO4 batteries and that may or may not be...

Check if the pod is solidly attached to the pole. Some have gotten ones that did not get a thread locker used and they came unscrewed.