https://www.landbigfish.com/Zoom-Baits/Shimmer-Shad
with the name I found this
Type: Posts; User: gofishloop
https://www.landbigfish.com/Zoom-Baits/Shimmer-Shad
with the name I found this
What Zoom trailer was Randall Tharpe using at the Bass Open at Okeechobee??
My 17 521c had a 2S 250 originally, it ran best with a 3 blade fury. I keep a full boat and 2 10' blades. I tried a 24 3 blade and it hurt hole shot in june and later when temps were up. I could...
Guys - There is a new tire available. I ordered them from Discount tire as they are the GA distributor. Vision Marine Heavy Hauler 215 / 65 / 17. It's a 10 ply rated at 80 psi. Been in use on 4...
I second shark tooth hunting, go to fort clinch and then go south on beach from high tide to falling is good and early am too. Get a telescopic scooper, it will save your back!!
2017-Z521C
What options are there for a light weight cover for night before events while at hotel etc, not wanting to deal with full cover and not for towing? Something to minimize dew light rain...
I have a (roughly 5') rack above my boat with metal conduit hanging from 8" chain from bottom of ceiling and have rods laying both directions. Only access from boat or ladder out of the way and...
I have a 521C- Fully loaded 2 anglers full gas gear and livewell running up river this weekend at G-ville with heavy current we ran 68.5. I have a croxton worked 23 fury. The fastest I have been...
I sure will now for sure!
I have a 2017 521C trailer, and have leaking rear seals. The old link to the UFP hub service is not working I assume from the Dexter consolidation. Does anyone have a source for the removal replace...
None in my box or GATECHFANS we both installed last weekend, but the manual says they are included........doesn't need them though,,
So guess what, there was a cable I had overlooked in the box that connected the 9 pin mini to the structure port. Can’t believe I wasted so much time. Thanks BBC, I’d be in trouble without this...
There is no place to plug this mini 9 pin transducer cable.
I am trying to connect to the HDS Carbon 12. Seems that the ghost has a mini 9 pin and my manual says " needs 7 pin connection" no part number or better description or whats needed. No online...
Same here, 23P 3 blade fury and it runs lower on JP than my 2 stroke did.
23P 3 blade fury
My 2005 was in the box in front of the drivers console.
Jason,
So I have only been to Cookville a few times but have been to Livingston many many times to visit family. My late mother and father met while attending college at Tennessee Tech, in...
My console unit is asking (over and over) if I want to change to different source like another map chip or navionics or lowrance source, any reason why it is doing this??
I used Jaco for a repower in January. Pleasant experience 100%! My motor ran full throttle day 1 and height was spot on. Still loving the 4S and almost to 14 hours.
I had a 2005 520svx 225-optimax for years (and miss it 60% of the time I am in my 521c) best prop for me was a 24P 4 blade fury hands down and I ran a number of them til it came out.
Don, Thanks for the response, its not bad. the contact happened when trimmed down at idle. i quickly trimmed up and got out of gear, but the edge is rough. I am going to smooth it with a file,...
serial # 2B736824
So a week long trip to Big O resulted in some "break in" love the skeg. Whats best way to deal with some dings / dents with some rather sharp edges. I guess a file or...
Any thoughts on the cooper discover AT 3? I’ve had 1 Kenda separate on me and busted 2 on curb with cut in sidewall due to tight areas and bad driving I suppose. Want a tougher tire for sure!
So I am taking last trip tomorrow with 250 ProXS 2Stroke have about 1/8th a tank of gas: Then Thurs/ Fri the 4S goes on. I usually run quickcleen and buy 100% 87 octane. Any reason thats a...