The Mega 360 has two separate imaging piezos. Each fills one half of the screen as it sweeps. Not sure what you mean by "the image will not stay on the screen" but if 1/2 of the screen looks correct...
Type: Posts; User: SLYDoggie
The Mega 360 has two separate imaging piezos. Each fills one half of the screen as it sweeps. Not sure what you mean by "the image will not stay on the screen" but if 1/2 of the screen looks correct...
The answer is yes, but exactly how you do it varies with the brand and model of motor. If you don't have a NMEA 2000 backbone already, you will need to add that, as I think all the solutions go...
If you haven't downloaded the One-Boat-Network Operations Guide, it is available on the Humminbird/Support/Manuals site. It also has information on transferring waypoints.
Yes, the update instructions say to apply the control head updates first and then update Mega Live. I don't think you hurt anything. As long as both were applied, you should be OK. You may have to do...
Unfortunately, there is typically no quick way to get to the bottom of intermittent network issues. You just have to go through a methodical problem resolution process. Any intermittent network...
It has worked for some with touchscreen issues... as well as a several other solix issues.
No. That can only be done with Solix and Apex. There is no view option for this on the Helix.
You didn't say which units you have, but on Solix and Apex you go to the screen where you select your sonar sources for each type of imaging. When you select Mega Live when you have two Mega Live...
Also, it's helpful to be able to power off the switch when making network connection changes to reset everything. If it would be cut off by a whole boat switch, that would work as well.
Try cleaning the wet switch... the 2 metal dots.
If still under the 2 year warranty, contact Humminbird.
You might want to take a look at this video I posted on YouTube. Be sure to read the description before watching the video. Pollen is not the only thing that can cause unwanted surface returns... all...
Are you sure you didn't inadvertently turn the brightness down to 1, or put it in night mode, so it wouldn't be visible in the daylight?
I have heard that adding a brace voids the Mega 360 warranty, but I haven't verified that claim.
You can use the Mega Live Interference Rejection setting on your standalone unit but it can only control the sequencing and duration of the sonar sources it can access, which is only sonar sources...
If the power is truly cut off, there is absolutely no way for it to feel warm, except maybe from sunlight. I would check to make sure it is really being cut off with the master switch. If you have a...
I have a post about networking 2 Mega Live with my Apex units. I think the key is that I'm using the ports on my Apex units for the Mega Live connections and not the 5 port switch. I did try running...
I ran my 3 Apex environment for a long time without a 5 port switch. I ran everything through the dual Apex ports and it worked great... very fast and no issues. I added one of the new 5 port...
Here is a 16 minute video sped up to play in 2 minutes. It has both Mega Live and Mega 360 in operation. Watch the Mega 360 image as I'm on spotlock with my Ulterra Quest and you can see how tight...
It sounds like you have a Gen1 unit. They are very susceptible to doing strange things when the voltage gets low. Make sure you have good strong voltage going to the unit.
As chad202 mentions...
The Mega Live & Mega 360 installation manuals both state to add a switch. Even when out of the water, the Mega Live and Mega 360 are "watching" for the wet switch to be activated, so they always use...
Wouldn't you also need to take into consideration the combined Amp draw for all the equipment connected to that line?
I use the Rapala Jigging Rap, but only in the late fall through early spring. In the summertime, I troll for Stripers.
If you have the full size Advanced GPS Remote, you can use that. I also thought you could do it from the Minn Kota control on the Helix as well, but I'm not a Helix guy.
I have had the Ulterra Quest since October and can say that the SpotLock on it holds very tight. I have a 22 foot Tritoon Pontoon which is very susceptible to wind with the typical pontoon profile....
