Search:

I actually had 2 24v in parallel and would run low on power by noon. I will be putting in a 80-100 ah 16v for all the electronics.

Well I isolated the orange wire that is running all my electronics and I have 16 V to the electronics everything seems to be working fine. The part that is confusing me is if the power switch at the...

Can anyone who has separated their electronics from their main cranking battery point me to a diagram or tell me which wires I need to isolate and hook to my dedicated electronics battery? I am...

Anyone have pics of both mounted to the trolling motor?

Nice job! I wish I would have pulled a few more panels like you did. probably would have made fishing wire easier. I put in a fusion radio and 2 infinity 6.5" and it sounds really good with no amp....

Anyone know the trick to remove the trim ring for the courtesy lights? I am wanting to switch to blue but can't get the others off.

Ok I finally was able to get it to a shop and there was no fuel pressure at the rails. After some trouble shooting they found a rubber sleeve between the VST and the fuel rails that was cracked not...

I have not but can get that going if it’s the next logical step.

Any additional thoughts guys?

New update...belt tensioner is at 75 in# before bottoming out. I pulled the reed plate, cleaned, and inspected. Pictures included and nothing seemed out of the ordinary including a couple spins by...

Tonight I pulled the belt all looks fine there. Tensioner seems to have normal pressure. The compressor if I turn it by hand I hear no grinding or wired sounds and you can hear and feel it pressurize.

I did some basic inspection there…any specific procedures to verify all is working correctly? Thanks!

Sorry guys I had to fix my post there are no beeping alarms. Still need to get this on the G Diagnostic as a next step?

unfortunately I don't know the fuel pressure but that seems like one of the things I will need to check as I am suspecting something fuel delivery related.

2007 250 SN1B473522

Hey all, I was idling at a strip pit the other day and motor just died like you shut the key off....no alarm. It started right back up and ran for a bit then died again. ...

Well I can confirm that I have 5000 waypoints based on what I saw on the unit, 0/5000 with 0 being remaining, but I am guessing that I must have imported some and they duplicated or something because...

Mine is under the bow plate. Most guys I know put them there unless there are other reasons to put in rod locker.

I have a couple 8612’s and last time I was out I wasn’t able to add waypoints as it said I was out of space...seemed kinda odd to me as I don’t think I have that many compared to most out there....

Tracking this one as my 8612 may be getting rolled back.

Wouldn’t feel good about that on a ram. Van at BBT can set you up. Got dual 12” at console. You have a small plate so his design that creates a 3rd support will handle the weight. I have a z21 and...

Will the props interchange or do I need to buy different props switching to a 4S?

Interested...I have done a set up with iPads. Please pm me.

yes it will mirror a unit. So if you have an 8600 at the bow and console and can really only use one at a time the ipad can be mirroring the other unit. for example if I am at the console I mirror...

Once connected to active captain helm you have the exact same control and function as you do on the Garmin unit.

Todd and the Garmin team helped me out. I had the same problem and had a new pedal the next day and all is good now.