I was just told that this is for a 4 Stroke, the top of the shaft has two sets of splines. Is there anywhere that I can find bolt patters or any other identifying characteristics?
Type: Posts; User: Kzaker
I was just told that this is for a 4 Stroke, the top of the shaft has two sets of splines. Is there anywhere that I can find bolt patters or any other identifying characteristics?
Thanks again:)
Thank you,
EuropeanAM, what’s the difference between the lowers for the mid Optimax vs the 4Strokes?
Maybe I’ll dissect it as a learning tool.
I picked this lower unit up from a guy closing his shop. He said it was from a 200 Merc but after looking on line for references, I’m beginning to think it may be from a smaller 90-115 HP opti,...
If you use an iPhone, download the PhotoShrinker app, works great for this forum
Picked this up from a guy closing shop. Said it’s a Merc 200 outboard but I know it won’t fit my 2000 200EFI. Is there anyone who can tell by the shape/ bolt pattern what this is off of? 2.5l or...
Still troubleshooting this.. the tach apparently only does it while the motor is running- I’m not exactly sure why that is.. with ignition on and dash on, tach stays at 0
Thank you. I will check again as I believe you had just made a note in my previous post to connect engine terminals first, then largest to smallest, which I have done.
Under NORMAL conditions,...
OT153924
200EFI.
Just replaced the regulators with new oem, I’ve never had this issue before but I always had a bad regulator so I’m not exactly sure where I would be crossing/shorting. Doesn’t...
That was a task! All done, something at the bow was messed up: chop it all off and installed new color coded tinned wire and shrink wrapped them all up. Never would have started but ordered led...
So... when the switch is on nav, ONLY the nav light should be active:correct? And same for anchor? Never both at the same switch position??
Yeah- I have the front nav light with the switch and white light. I think I may have something crossed there. Reason I think it’s the white bow power is that EVERYTHING is on when switch is off. The...
As I have never done anything to this circuit on the boat but for some reason; when I turn switch to anchor: the anchor and nav lights are activated. When on nav: only the anchor light comes on......
I just chucked up the correct hole saw, cut through plywood a few times then stacked the cores on the pilot bit. The cores were exactly same size as original hole and worked perfect to guide the...
Thanks for the wires Jay, good taking with ya buddy.
Sorry, no, I ordered elsewhere but that was a quick reference to the same part number when I put it in the google search bar. But I did make sure that I ordered NEW OEM parts. And thank you SO much...
http://www.bbcboards.net/attachment.php?attachmentid=339872&stc=1I believe I found it now in the schematic.. was looking at a 1999 diagram and it wasn’t there( or at least that I could see). I’ll...
When I looked up the SN, I came up with this part: 883072T2 (apologies)<EDIT- Please read the Forum Announcements. We do not support parts purchased from Ebay.>
Ill know for sure when they...
I am ordering 2 new regulators tonight. One has a hole blown through the insulation so I’m going to assume that’s at least the start of any repair if it isn’t the extent of the damage. I see some...
Thanks. I have read that these motor without alternators are not designed to handle the stress of optima AGM’s and everything I read tells me the same thing. I hate to buy another battery since that...
I posted in electric forum then figured I’d probinly get more specific answers here so:
I have the above motor (SN: OT153942). The charging has never worked since I owned the motor (last year). I...
I have the above motor (SN: OT153942). The charging has never worked since I owned the motor (last year). I haven’t needed to additional charge but want to get it fixed. The battery, when charged is...
No. Removed the original and took it to a welding shop and had them weld an alum nut on the bottom. Now I’m having a hell of a time keeping the bolts tight to the floor- keep snapping the bolts off....
What about this:
http://www.bbcboards.net/attachment.php?attachmentid=333988&stc=1
38 diodes total on a 20amp circuit should be ok, I’d think?
No comment
Somehow I figured I’d reach the conclusion that just going with the 7pin into a j-box and connection block would eliminate any second guessing (like above). It seems to be the simplest solution at...