Garmin GT54 transducer mount on 2012 Z119. I attached a before transducer mount and after it was mounted. I took a piece of plastic deck about 1.25" thick (Timber Tech) to make the mount and glued to...
Type: Posts; User: mercuryxri
Garmin GT54 transducer mount on 2012 Z119. I attached a before transducer mount and after it was mounted. I took a piece of plastic deck about 1.25" thick (Timber Tech) to make the mount and glued to...
Trimax can provide keyed alike receiver/coupler locks. When you order online just specify in the comments section that the locks are to be keyed alike. You will have to purchase each one...
Can someone tell what years these 2 Ranger catalogs are from?
Thanks
I have a 2011 200 SHO with a Garmin 93UHD, yes it does display the engine water pressure. If I remember correctly it is under the engine data section. You will have to purchase the pressure sensor,...
Home depot or any hardware store in the electrical section.
I have a 2012 119, I mounted my GT54 transducer over the live well overflow. I used a piece of timber tech composite decking, cut a hole for the overflow to drain, mounted the timber tech using 3M...
Yamaha 225, V225TLRX
Had an unfortunate event when my boat was partially sunk. I suspect that water got in the engine via the intake, the engine was not totally submerged just the lower part of the...
During installing the seal on my boat trailer hub, I inadvertently over drove the seal into the hub about 1/16" to 3/32" below flush with the rear of the hub. The bearings do not appear to be...
Has anyone used a K&N oil filter on their SHO 200 HP and above? They have a higher flow rate and pressure rating. The K&N cross for the Yamaha N26-13440-03 is HP-1002.
Both links are actually the shinny black that will match your Yamaha cowling. I purchased both the spray can and the kit, both colors identical. I repainted the top part of my cowling with the kit...
Spray can: https://www.partsvu.com/yamaha-marine-outboard-engine-cowling-spray-paint-na-shiny-black-acc-mrnpa-it-na.html
If you have the equipment and painting skills this is a nice kit:...
I recently built a MHX Elite-X NMB873, using it for senko style baits. In my unprofessional opinion I feel that the MHX Elite-x is more sensitive than the NFC HM x-ray that I also built. After...
I am currently running a Yamaha Vmax prop 15 1/4" x 25p on a 2012 119Z Ranger powered by a 200 Yamaha SHO. I am able to turn 6100 rpm with a good load, good hole shot, lift comes in about 4800 rpm...
I have a Hummingbird 858C DI with a XNT 9 DI T transducer. The transducer is currently in the bilge working with no issues except that the temperature is useless in the bilge. I am wanting to...
I have a Hummingbird 858C DI with a XNT 9 DI T transducer. The transducer is currently in the bilge working with no issues except that the temperature is useless in the bilge. I am wanting to...
Helping a friend trying to remove his seats from his 1989 Pantera to get the seats recovered. I see rivets behind the seats under the live doors that have to be removed. Is there any fasteners at...
Not the traditional bass boat seat but far more comfortable and functional than the traditional bicycle style seat, I really like mine.
...
I purchased a 200 SHO used with the hours listed below:
Engine speed
Time[h]
- 1000 r/min
14
My opinion that is one of the two switches has failed, Ranger wiring is quality and rarely a wiring problem.
Their new website is: https://www.rangerboatsgear.com/
That switch on my 1992 374 was a spare for the owner to use for what ever he wanted.
Hope this documentation helps, fairly simple if you follow the procedures.
I used 3M 5200 to glue a block of vinyl flooring that us about 1" thick. My Garmin 73DV performed flawlessly at any speed and never had any issues with the mount. Bass Pro shops sells a mount...
I am selling my gauges from my 2012 119Z if anyone is interested they are listed in the Miscellaneous for sale section.
http://www.bbcboards.net/showthread.php?t=1094129
When using my Echomap UHD 73sv on the higher side view frequency setting there is interference when using the Minnkota Fortex 80 lbs. trolling motor. The transducer is the GT54uhd mounted on the...