I have an Optimax 225 serial #1B378539. What are the specifications on the 2 fuel pumps in the VST? The pump model numbers are 888725T02 and 888733T02. What are pressures, flow rate, and current draw...
Type: Posts; User: scottsdale816
I have an Optimax 225 serial #1B378539. What are the specifications on the 2 fuel pumps in the VST? The pump model numbers are 888725T02 and 888733T02. What are pressures, flow rate, and current draw...
I am still learning about my Lowrance Elite 9 ti, I purchased them with the Navionics card and C-maps. Which is the better card to be using in them? What is the difference in them?
I pulled the gas tank out and checked. The knee braces are starting to break loose from the floor.
I noticed the last time I had my 2007 199LE boat out, that the motor was bouncing some while running. When looking back while running you can see the top cap flexing some. I have an Atlas Jack plate...
I am new to depth finders and have a few questions. I am running the Lowrance Elite 9 with total scan transducers, one unit on bow, 2 at the console( one unit at console is using thru hull...
I have a 2007 Alpha 199 that when I turn on the front courtesy lights they will come on but after a couple of minutes they go off and the control panel indicator light will flash. The indicator light...
Can you please post a picture of it
I have my Total scan transducer mounted off the side of my Atlas jackplate and it is causing a high rooster tail that is flooding the side of the engine with water. Is it too low in the water or too...
I have the TI units. I bought them a couple years ago and never installed them, they have the total scan transducers with each of them.
I thought all three of these graphs could be networked together and share the same transducer especially since they will connect by WiFi also. So both graphs at the console will have to have separate...
I am installing 3 Elite 9 TI units on my boat, I will have 2 at the console and 1 on the bow. I am planning on networking these 3 together with the NMEA 2000 cables and tees. I will also be adding...
I have an older LGC 2000 GPS on my boat an updating the electronics. Should I just by the adapter cable an connect this or would I be better to buy a new Lowrance GPS unit that will attach directly...
I have an Atlas hydraulic jack plate on it. I have been looking at the brackets that mount to side of jack plate.
I just bought a 2007 Legend LE199 and will be adding (3) Lowrance Elite 9 TI with Total scan transducer on it. I am trying to figure out the best location to mount the rear transducer. It has a...
I am looking to install a Lowrance total scan transducer on the back of my 2007 LE199 and wasn't for sure where it needs to go. Can it be installed next to drain plug or is that too far tucked under...
I just purchased a used boat that has clear marker lights on the inside of the trailer rails under the boat. These are not working with the running lights but it has a electric boxed mounted at the...
How does this mount to dash panel? Did you relocate any of your gauges?
What mounts are you guys using to mount your dual graphs at the console? Anyone make their own? Looking for ideas. I have an 07 199.
I am considering buying an 2007 LE199 and wanted to know if there are any major issues with these boats. I know they are no longer made but was wondering how the ride was in them in rough water? Were...
All of this has been interesting, especially about parts from Skeeter and dealer.
I am looking at upgrading to a 21ft boat (Ranger) and will be fishing all the Bassmaster Opens next year which will require pulling very long distances across the US. I have pulled my other boats...
I have owned a 18.5 Ranger in the past and really liked it but now I am looking for a 21 foot boat to fish tournaments out of for the 2021 season. I've looked at used Rangers and can't find much in...
Thank you!!!
Went to Lake Garcia for the first time back around Memorial Day. First time ever there and water level was low, I tried to go straight out from the ramp and got stuck in mud. Is going straight out...
What is the difference between pump kits? just curious?