I performed a hard rest on all three units and the problem is resolved. Works great! Just to clear up any confusion, This was a networked system, one HDS 8 and 2 HDS 7's, all gen 2 units. I had them...
Type: Posts; User: 44Mag
I performed a hard rest on all three units and the problem is resolved. Works great! Just to clear up any confusion, This was a networked system, one HDS 8 and 2 HDS 7's, all gen 2 units. I had them...
I have been reading this post and I gotta say it sounds a lot like what I went through with my engine. I have a 2000 225 EFI and I know these engines are a little different from one another, but your...
Thank you NoCAL, I will give that a try before I give up on it. It belonged to a friend of mine as it came out of his former boat. I can confirm it always worked fine for him, which is why i was...
Hello,
I have been running three Gen 2 HDS units on my boat, all linked together with an LSS-1 structure scan module. I also have an LSS-2 HD skimmer installed. This system works great and has been...
Looking for a lightened flywheel for my 2000 Mercury 225 EFI, 3.0 liter. Please let me know if you have one you would like to part with. Mine is the dual ECM model, 4 shutter valve intake, narrow...
Thank you everyone. It looks like it has been discontinued and my best bet is to just make one or have a local shop make it. Seems simple enough. Thank you for your help!
I have 2000 Triton TR-21 with a 6" Pro Hi Jacker manual jack plate and I have been searching for a holeshot plate that will fit it. I contacted TH Marine and was told that they do not make one for...
UPDATE- It has been a strange year for me, and I have not been getting much time on the water, so it took me a while to really notice I only had a part of my issue fixed. Many of the lakes around me...
Purchased a new one- Please remove this thread.
Thank you.
I am searching for a used working stator for a 2000 Mercury 225 EFI serial number 0T121338. Should be Mercury part number 398-821935A5.
UPDATE- I have rebuilt my vacuum operated fuel pump with an OEM kit (previously used a aftermarket) due to it leaking and replaced the fuel primer bulb and line to the pump just for the sake of doing...
I understand that this is an open-loop system and that the igniton and fuel curve are pre-mapped. But it still uses a MAP sensor, a TPS, and temp sensors to determine engine speed and load and make...
NoSloProcraft, I was actually just reading through your post about what you have found with yours and then seen your comment. Thank you for the suggestion. I have tested my IAT, but not in an ice...
Like I said, we will see what happens and at least iam fixing something that needs to be fixed. I really hate just throwing parts at problems. When I posted this, I was out of ideas and hopefully...
I think I may have found the issue, and JOE54 nailed it. I went into my garge last night to look over the things that everyone has suggested, and proceeded to check the fuel pressure regulator final...
Joe54, I have inspected all of the bleed lines and fuel lines as they have all recently been replaced and I am not finding any issues. However, I do feel like the gas smell is much worse after a run...
Holds steady at 36 psi.
My fuel gauge is accurate, and I also wondered if that 4 psi would cause it. But that is deadheaded, key on engine off. Isn't the regulator supposed to prevent it from exceeding the spec? Maybe I do...
2000 Mercury 225 EFI, serial number 0T121338 on a Triton TR21. I have just rebuilt this engine over the winter and I have been fighting through some issues with it. New pistons, rings, bearings,...
Thank you everyone for the responses. My general thought on most parts is OEM is probably best, but when it comes to plug wires that sometimes just is not the case as there has been many advances in...
Mercury 225 EFI serial number OT121338. I recently completed a full rebuild on this engine and realized I am running this with spark plug wires that are literally 21 years old. In the automotive...
In search of a lightened fly wheel for my a 2000 Mercury 225 EFI 3.0 liter. Serial number OT121338.
Thank you everyone for the help . I was able to find a set.
I am looking for 6 good rubber coated reed cages for a Mercury 3.0 liter 225 EFI, 6 petal. Engine serial number OT121338. Should be mercury part number 828623T 6
Thank you, that pretty much answers my question. Looks like I need to find a new set of cages. Mine are in way worse shape compared to those.