Search:

​Looking for a NON- Bluetooth foot remote THANKS!

I’ll try it! THANKS!!!!!

That is the EXACT procedure I’ve been doing. It has about a 2-3 second pause between the lift/ trim cycles and then won’t go completely to the bottom of the trim stage. You can push it down all the...

Serial # OG626254

I have a 98 mercury 225 EFI and the lift cylinder seal was leaking. I replaced the seal/ o-rings in the center lift cylinder and didn’t do anything to the tilt cylinders. Filled back up with fluid...

Yes it worked flawlessly for 20 years (I bought it brand new) there were only 5 o-rings and the seal- kinda hard to screw up I thought but IDK stranger things have happened lol

I have a 98 mercury 225 EFI and the lift cylinder seal was leaking. I replaced the seal/ o-rings in the center lift cylinder and didn’t do anything to the tilt cylinders. Filled back up with fluid...

I have a 97 912 savage with a 225 merc-I LOVE IT! Runs better than my 13 Z-9 with a 250 merc. Only drawback is they guzzle fuel

I'd flip out and make a scene! LOL The squeaky wheel gets the grease!

Yes it's a manual JP and I've just about worn out the bolts moving that sucker up and down! The highest I went was 2 1/2" and it just started blowing out!

It's actually a 10" slidemaster and I added 2" setback spacers

I don't know of any Z-9s but all the others I know of ( triton- legend- skeeters etc) are 62-65

I've tried everything I know! FIRST of all I'm running at 5400' elevation- 23 tempest b&b with added cup- 54-5500 rpm- runs an extra couple hundred rpm same speed with a 21 tempest- 12" Jack plate -...

Sorry I don't and boat is in Texas so I can't get any

Did you ever figure anything out? I have the same boat/ same problem! Only difference is I've got altitude of 5400' with a 23 tempest b&b and cup added for lift- THANKS!

I have the same exact 912- put speakers in sides under consoles- wish the stereo wasn't in the glove box though- could use the space-I also have a Z-9 and I put the stereo in the dash where the...

Last year I bought a 2013 Z-9 Pro XS 250 at lower elevations (seemed OK) brought home (5300') never been able to get to run anywhere near expectations (only 53mph at 5400 rpm) tried 5 props to no...

THANKS A MILLION!!! for this post- never give it a thought- been buying props/adjusting height/ literally going nuts! Went out pulled the cover had wife floor it and found another 1/4" of throttle...

Are all Tempest Plus props flo-Torq hubs