Your echomap requires power 9-18volts. Your GLS10 requires 10-32volts to be supplied. There is no difference in the picture if the voltage is within these ranges.
Adding these extra units place...
Type: Posts; User: LWINCHESTER2
Your echomap requires power 9-18volts. Your GLS10 requires 10-32volts to be supplied. There is no difference in the picture if the voltage is within these ranges.
Adding these extra units place...
It shares through the ethernet port. Ethernet cable from this unit to another compatible unit or to a GMS10 box with additional ethernet ports. Ethernet=sharing sonar and waypoints.
Before the...
If you press and hold HOME until the screen blinks, a screenshot is saved to the sd card in a directory named /Garmin/Screenshots.
It will be an excellent copy of the screen. Pics taken with a cell...
Need to see a screenshot of that.
I think you mean LVS62.
If you are referring to the 12-pin transducer connector you probably don't have to narrow your selection to 93sv. Most Garmin units use this connector.
The correct mounting of the LVS on a plumb TM shaft or stick is to insure that the three arrays of elements are pointed properly. For the Forward Orientation, one array is horizontal, one is tilted...
I know that side imaging has a huge dedicated following. While I use it at times, I don't generally use it for what most advocates promote---structure. For me, my best use is to inventory an area...
That's what I do but I use the Y cable so that it only uses one port. I have 2 16 in units and show the left side on one and the right side on the other. It's a dramatic improvement over showing...
lakes.garmin.com
50% alcohol, 50% distilled water. Been using it for many years. Maybe read the manual.
Yes. There will be some.
Pretty sure you are wasting your time.
Side imaging is side imaging regardless of how it is mounted or which way the boat is turned. Fish that are in the water column at a depth less than the distance to the bottom have always been easy...
Interesting situation. My units are GPSMAP units but the software between them and echomap units has a lot of similarities. My units displayed GLS10 until I got two of them. They had different...
Try hot swapping. That is, after everything is up and running, unplug the LVS32 from the box. Wait 15 seconds and plug it back up. Still waiting to find out the software version on the unit and...
Maybe I missed it. All I saw was that the gain looked a little more on one. I don't know that a gain setting of 65 on one unit would perform exactly the same as 65 on another unit. Might have to...
Well at least its not someone claiming high voltage will give you a clearer picture. Website says voltage must be 11-16v. So a new power cord or something in the power cord for the black box will...
What are your software versions on the unit and GLS10?
That's all relative to each user. GPS-24xd is accurate to 3 ft. If you need/want that kind of accuracy you'll need to buy it.
There's not a lot of choices when the LVS compass won't start the calibration. The most likely choice is mounting. If you've mounted the transducer correctly in relation to the shaft, then the TM...
I think you can do what you want. Just take the adapter, small round to RJ45 and use a continuity tester to id the wires in the round connector. On the RJ45 it will be 1,2 and 3,6. See which wires...
Very nice unit. I'm running one alongside the 8616 for a few months now. I'm not seeing any performance differences. It even has the video input for my camera that lets me use AC and record the...
Yes. Garmin's network cable maintains connectivity with the shield ground to a metal shielded RJ45 instead of just the plastic one. They even make a kit for doing this.
Seems I recall someone else reported simulator problems after a software update. If I remember correctly the simulator files are not included in the software update and were in a separate...