Search:

No one carries them in stock near me, and I figured if I order through someone on here I'll be supporting a fellow angler

4

Will they ship?

Does anyone on here sell PVS plugs? I have pay pal, and will order immediately.

I'm running 5500rpms at 52 mph. I'm getting a lot of prop slip due to the prop trying to blow out. This is with the jack plate all the way down. I can't lower the prop any more so I think I'm just...

It feels like it needs more trim but if I trim it any higher the prop blows out. The more I get into this I am coming to the conclusions: A) Not a pad hull= no good, B)Prop is flawed

I have tried raising the motor and it seems to lose grip at the same trim until I get too high then it blows out sooner. I would like to try another Tempest plus as the one I have now was damage by...

:thumb up2:

Gentlemen,
Im having an issue with bow lift on my 2018 Crestliner PT18. Im running a 150 four stroke with a 21p tempest plus, and an atlas 6" jack plate. As I trim up the prop will blow out before I...

Can't wait. Got my boat all set up this season so Ill be able to fish from the front this year and give one of my fellow soldiers a chance to fish from the back.

Would plugging the pvs holes make a difference?

Im running it with my jackplate all the way down. Is there a way to lower the jackplate itself?

*EDIT : Just looked at jack plate, it is mounted as low as it can go, and motor is mounted as low as...

I traded my 19p tempest plus for a 21p tempest plus, but the 21 was damaged at some point and reworked. here is what is happening. With the 19, I was running 52mph but hitting the rev limiter. With...

With prop to pad being that deep I would think it is more of an improper exhaust ventilation issue that is causing the cavitation. Prop to pad on any boat I have ever owned has been close to 3.5"...

I have never run the hull without one, but it seems with the plate a 19p isn't enough

Sounds good, I sent you a pm with my number in case you need longer have it.

I am currently running a 19p Tempest plus, but hitting the rev limiter at 3/4 throttle. My prop is in perfect condition, and I checked several prop slip calculators stating that I am only at 9-12%...

I have run some pretty rough water, and never experienced this. You my friend must be running some crazy waters. As far as I know there isn't a remedy for this, but hey, I don't know everything. you...

Still playing with the prop on mine, currently running a 19p tempest plus and hitting the limiter at 3/4 throttle at 51 mph with full load, livewells and a co-angler. Can't post a pic for some reason

Does anyone know of any (other than Warriors on the Water) military fishing tournaments near Ft. Bragg?

:thumb up2:

I think a 21 can be turned on this boat with a Jack plate, or if the prop was blue printed and balanced.

:thumb up2:

This makes me wonder how much variance there is from prop to prop out of the factory. according to the calculations at 55 I would only have 2% slip and that seems very unlikely. I wonder if mine is...

My PT 18 must be a freak of nature because I'm running 54mph(gps) with a 19p Tempest and am currently looking for a 21p because if I run wide open, I will hit the rev limiter. I believe with the...