3.1
Type: Posts; User: 188ELITE
3.1
Sent you an email
Ok I'll get you some on a bit thanks
I hit a log a while back and cracked on of the fins on the lower unit and damaged my 25m prop. I have sold the boat. It's off a 2002 200 ox66. Is there any value in this to anyone? I had to buy a new...
I am taking my little girls out tomorrow to do some fishing and test out my boat after some repairs. Anyone have any report from badin on the bite?
While replacing the oil pump wiring I found a black wire that looks like it runs to the trim gauge broken in half. Going to repair that and I think it will fix the trim issue. Will update later on....
Got the oil tank promblem fixed it was the jumper from pump to engine. Trim still dosent work so I am going to start on that next.
I have a 2003 200 ox 66. My water pressure gauge and trim gauge have quit. I pulled the water line off at the gauge and at the engine fitting and blow it out with air and I am getting slime like...
So while waiting on the new harness I had a little time and ran an overlay. Definitley the promblem fired up the engine on the muffs. Purged a little air out of the oil line and the tank on the...
I'm running a yamaha ox66 on my 188. 25m wheel most I have ever gotten on gps was 69.5 mph.
Ordered a 10ft harness today as soon as it gets here we will see if it fixes the promblem. Got my fingers crossed. But if there is no continuity on the jumper from the pump to the motor I feel that...
No
I did but if the wire is just a jumper from the pump to the hookup under the cowl there should be continuity with key on or off. Correct?
So I went and checked for ground from the switch to the hookup for the pump no ground when switch was moved. I then followed the wire from the pump back through the rigging to the inside of the cowl....
Yes the pump dosent run at all. I guess I need to start checking grounds. So I should only have continuity when the switch is on?
So I have a 2003 200HP ox66. I have never had an issue at all with it. I took it out last week and made about a mile run and the oil alarm went off. Got to checking and the engine tank was almost...
Thanks for the info just wanted to make sure I was correct before passing that along.
I have my champion for sale. It has a 2003 200 ox66 on it. I have had multiple people ask how many hours are on the motor. I have told them that I believe you could not pull hours from an ox66 like...
I talked to John and I may end up letting him sell it if no interest here. And I will tell him you said hello!
Well I did my part I put it up for sale. If it doesn't sale I am not going to cry. Just biulding a new house and it would definitely help if It did.
Don't worry have met a lot of great people here. Will always consider my self a champion man!
Just sent the info over to Al. Won my first tournament in this boat. Man I am going to miss it. Man out of all the choices I had for my first boat glad I picked champion. It's definitely been a great...
Hey I finally left Ford after 17 years. Working at allvac now. I need to come see you guys. Just had a baby bot last week so probably won't be fishing for a little while.
What's going on Frank? Long time no see. Hope you guys are doing well. Talked to Joseph said he had a tough day in my champion. Guess he will learn to make sure he gets those batteries plugged in lol.
Hey guys havent been fishing in quite a while. Heading to Norman tomorrow, anyone have any pointers?