Search:

Slowboat76 I think I might have paid 35-45$ for all the etching. The material I had laying around the garage and bought an eastwoods powder coat gun with powders and a used electric oven off...

Slowboat76 I took all of my switch panels, bow slope panel and controls panel off. What had been plastic I cut out of 3/16 aluminum and brushed it with scotchbrite pads for that brushed look and then...

Ted, I pulled the two screws on the lens cover to gain access to the bulb. There is two more mounting screws inside on the housing/reflector. I used a heat gun/hair dryer to warm the lens up a little...

I have the same year and model boat, and mine had (originally) 1895 bulbs and replaced them with LUYED 3014 30-EX LED bulbs. They have 30 super bright white LED's and fit with just a hair of room to...

8" manual, but wished I had bought a Hyd plate instead. For me it was getting cleaner water and ease of fine tuning. 1996 186TF 175 ProXS. Jumps like a bullfrog out of the hole but hits the limiter...

Hey guy's maybe someone can help me out here. I'm installing a T-H marine rigging tube on a Mercury 175 Pro XS serial # 1B803142 and I'm not real sure of the best way to attach it to the engine side...

TOC that's going to take a lot of mat and resin layers. Mine is 38" long 3" wide 2 3/4" deep and is totally below the deck. I'd post a pic but I'm lucky to turn the dang computer on LOL

Hey guy's I'm recarpeting my 96 186 and want to fill in the lure/chunk tray that is on the starboard side between the rod/tackle box and the side on the front deck. How would be a good way to fill...

My 1996 186 has a 2010 175 Pro XS with 23 Tempest,8" jack plate 2.75" below pad and it literally jumps out of the hole like a bullfrog in 1 second or less and I think I still need a bigger prop as I...

That would be a handful. Probably quick though.

I had a swing evaluation at the Tulsa store and had a great experience. So much that I ordered a set of clubs for my 14 year old Daughter and set her up with a lesson plan and I as well. Her coach...

I just checked out the Ranger Board and a lot of folks seem to be flipping out (no pun intended). I personally don't care for the Ranger/Stratos/Triton line. I think that they are way to overpriced...

I read on facebook that Ranger Boats was sold again along with Stratos and Triton to none other than Johnny Morris/Tracker Marine. What do you guys think about this if it is true?

12.8 but I have only been serious about playing for 10 months now and have a long long way to go.

Same with the 4 hybrid I just purchased. WOW is all I can say! The G30 lineup really is worth the price in my opinion.

It would be nice to have a little sound with those pics Tommy. Uh Humm. LOL!

Oh it would be easy to order a new one...paying for it is something entirely different. I still haven't found that winning lotto ticket yet.

I think that the color combo on #13 is absolutely flipping sexy! I wouldn't ever get to fish cause I would just be drooling all over it. LOL

+1 on the simple green. I let it soak 1/2 hr and spray again and used a toothbrush to gently scrub it off.

Ha Ha got it! Yes they were in the livewell lid area. It only had 4 ss screws holding it in. It has been recovered at least once before and the lower screws at the bottom of the seatback were gone....

Can anybody tell me how to remove the seat back out of my 96 186TF? I would like to recover them and install new carpet before fishin weather really kicks in.

5300 RPM with a long run. I read somewhere that the K series is a general purpose painted stainless.

My fishing partner has a 1990 V4 115hp yamaha motor and the oil tank level indicator lights blink all the time. Tank is full and it is using oil but we don't know why the indicator blinks? Any...

Mark my fishing partner has a 1991 charger 162 with a 1990 V4 115hp yamaha. Engine is mounted in second hole with a yamaha K 21 prop. Holeshot is bad. Only getting 2800 rpm on take off and wot of...

I would also like to see the complete specs on the 797 also. It's hard to get a good look at that ride while it's burning up the water! LOL.
I'm still drooling over pics of it. would love to see on...