Search:

Interesting. Same outboard here so, where does the sensor plug into after it’s installed?

There’s always a Ranger RT178 for sale on facebook marketplace for a deal. Just about any boat of decent quality in this size is going to be just fine. You won’t miss an inch or so. Go with what...

My RT188 transom looks the same as yours. I put mine inboard in between those outlets like you have pictured. It works great! I'm getting depth at wide open speeds, side imaging works great. This...

Thank you for the reply. Yeah, I’ll go with the $200 vessel view mobile option.

Reply to add, Mercury vesselview mobile may be the easiest and lowest cost route to go for this. I just hate the idea of my cellphone in a cradle witht he potential of it bouncing out and into the...

I’m at work but it’s a echomap uhd 93sv with the gt54uhd-tm transducer. The option to view gauges is there.

I'm interested in possibly hooking my EchoMap 93sv to my Mercury Pro XS. Can someone point me to what is needed to do this so i can see what the cost would be? Thanks!

I skipped using their tiny wire and used this setup. It’s easy to run

https://thebasstank.com/products/the-bass-tank-power-harness

Understand.

Insure your lower unit then. Progressive has optional insurance for lower units. It’s not much more.


Propulsion Plus® mechanical breakdown coverage
We’ll pay to repair or replace the lower...

Just hooked the hose to the flush port and hit a little dirt worked out of the telltail and it’s flowing great. Did not start engine though.

Mercury 115 Pro XS
Serial 3B124036
Command Thrust


I need to verify I cleaned out the tell tale outlet hose after running too shallow. Motor quit peeing but vessel view said it was running...

https://www.facebook.com/groups/415703175479296/permalink/1546495229066746/?mibextid=W9rl1R

I’m also interested

Thanks all.

As I’m sitting here at my console setting all the screen preferences, colors, etc, will they carry over to the unit I have networked to it on the bow? Or am I going to have to sit up there and do...

thank you! Mounting it tomorrow in the red location

I’m about to mount a GT54 transducer to my rt188. I thought I would be able to mount it in the spot with the green dot, but that forces the transducer to be way too low. The top of it would be even...

New picture.
Green for location isn’t tall enough. It put the transducer all the way in the water. The top of it would end up even with the bottom of the hull.
Red location will work, but is...

I’m in the process of installing a couple of Garmin UHD 93sv units. I need to mount the GT54 transducer on the stern somewhere. I’ve attached a pic of what I’m looking at back there. Not a very big...

Thank you. It’s a learning experience for sure.

Appreciate it. The 21p was used once as a trial. $400

trying to understand why the move up in pitch when this is a 4 blade? I’m learning here.

thought I found one locally lightly used for sale but unfortunately it’s a 21p like my tempest plus.

Yes, from vesselview mobile. It gets there easily too. Motor height is correct per everyone else’s rt188 with this setup. Prop will blow out if I am wide open, trimmed up, and try to make a turn to...

Traction sux with this prop. If going too fast, it’s easy to blow the prop out in turns. Trimming down helps but it’s still something that can happen. Wondering now if I should try a 4 blade
The...