I have checked all of that and its hitting the stops likes its supposed too.
Type: Posts; User: NC ASTRO
I have checked all of that and its hitting the stops likes its supposed too.
My 200 spins it fine and it gets out the hole good its a little lazy when full but its not bad.
Ok I put a water pump in and found my poppet valve was the cause of my low water pressure now it is 22-25 psi at wot . I was able to get my hands on a 26p tempest plus and ran it on the boat and it...
1997 Mariner 200 carb 0g452311
I am wondering if there is a kit for the poppet valve for this motor? I have looked and can only find it piece by piece. Any and all help is appreciated....
Sorry gaboy its taken so long to reply been wrapped up with work. Yes the pad is flat and it does drop below the horizontal plain. Yes its leveled out. I got the p.m.
OK you are talk abut the exhaust ports yes water should come out of there. It should be mix of water and exhaust . The water helps cool the exhaust ports.
ok .I know my 200 mariner has water coming from those holes. When you run it in the barrel are those hose covered with water like they are at the lake?
No problem. The primer bulb is in the fuel line going to the engine that you pump to get gas from the tank to the engine. The filter doesn't have to stay full if it sits half full that's fine. I have...
Hey welcome to the board! If it will run in the barrel it should run at the lake. To me it sounds fuel related like the carbs are not primed after being tilted up and trailered. make sure the primer...
Fisherofmen2 your boat is running great compared to mine. You're right they are heavy but ride like a dream. I have set in a bunch of different boats and my Astro has been the driest so far. I put...
Ok gaboy I will check the pad and get back with you. Its been so long since the lazer was on the boat I can't remember what the boat was doing.
ANG and gcross y'all are right it should have more...
I have sold the chopper. I would be happy if my boat would run in the mid 60s. Your boat is flying! I am going weigh all of the tackle I have in the bow and try and get it down as much as possible...
ok that makes a lot of sense because right now the water spray out from the sides is coming from the console area of the boat with no rooster tail.
Yes that is GPS speed.
Thanks! I can't remember the spec with the lazer. You are right it was the prop that was on the boat when got it. I am going to put a new pump in it I the next few weeks. After I change the pump I...
Thanks gaboy for the advise I have read a lot about the guys sets ups on here. I've moved all of my heavy tackle to the back and keep my stuff I use on the regular in the front center. That's the...
Hello guys I am new to the board and I have to say there is a lot of great info here. I have done a lot of searching on here trying to find a answer to my problem so I figured I would ask. I have a...