Got three aluminum seat post plugs. These are used to cover seat post holes when seats are not in use. Can’t post pics but I can text pics if interested. $30 for all three
Type: Posts; User: fishfarm
Got three aluminum seat post plugs. These are used to cover seat post holes when seats are not in use. Can’t post pics but I can text pics if interested. $30 for all three
Is your boat heavy? I’m running a 25p Fury 4 with a standard jackplate with prop 2 1/2 underpad on a 2000 Ranger 520vx and two Talons with a 2015 Merc 250 ProXs with tourney load im getting 73/74 mph...
Hey guys I have a elite 7TI that I’m not using and would like to put it in my side by side. How hard is it to put off road mapping to it. Originally came with cmap card
I added three 5/16 holes to my Fury 3 and wow. There are some top guys on the boards here who have done the same. If your happy with the all around performance of the prop other than hole shot then...
Get a 6in jack plate. With 25p tempest and my old 225 Optimax she ran best at 3.25 below pad. Full tourny load and two people I would get right at 68mph at 5000/5500 rpms and light load 69/70 mph at...
A friend of mine had it installed on his 520vx and the gap between the lids and deck were horrible but all in all the seadeck was beautiful but the gaps threw it off
Have not fished it yet. Are there any hazards to worry about on orange
Any reports on Orange Lake. From Ocala area and plan on fishing Orange lake new years day
Mine is still doing awesome from 4 years ago
For sale in motor parts
Give it a try
Ok whats your max rpm with your setup now and is your motor deeper than 3.5 below the pad
What are numbers and what prop do you have on it now
Ive Always heard to fill your tank with non-ethanol or if you cannot get non-ethanol still so your tanks all the way to the top and use a fuel stabilizer if you’re still your tanks up moisture will...
It all depends on work but you have but a five blade On Pretty much any bass boat may work the same a five blade has no speed whatsoever but it’s got a lot of pulling power to pull skiers out of the...
. That engine will not spin over or have maximum performance till you hit around 30hrs. I’m no expert but I wouldn’t be worried about proping till you get some more hours on it
I don’t believe what so ever it has anything to do with the craftsmanship that mark did to the prop. I’ve seen new untouched props throw blades but we are under the mercy of the manufactures and they...
I did all the same stuff you did and leak was indeed the screws on the back side of rub rail both sides of boat at the transome. Pulled rub rail off and removed screws and installed some 5200 on...
I don’t have the same boat as you but it is a 520VX that I put a 250 proxs on. The 25p fury 4 is my favorite prop by far. Not the fastest prop I’ve ran solo with light load but it is the fastest prop...
Got mine dialed in pretty good with my Fury 4 25P. Fastest 4 blade I’ve ever ran at 74mph. Roger I Just want to know one thing how in the heck do you keep your hat on at 76+ miles an hour LOL
21XDC is 1000 percent correct.
What boat you running this prop on. I’m turning 5700/5800 at 72 with a 250 pro xs on a ranger 520
My Ranger 520VX 250 proxs is faster with a full load with my fury 4 over my tempest. Tempest doesn’t even come close to lifting the boat like the fury 4 does. With out a load it’s only 2 mph slower...
Sorry for delayed response. Not on BBC as much as I’d like anymore. Yes I went one pitch down on a bravo xs. Holeshot on bravo was a tad better but lost 4 mph and for me losing 4 mph for the tad bit...
The Fury 4 will be faster with a load than you tempest because it carries a load better. On my ranger with a load i can run a 25 tempest at 5900 and 70 mph and a 25 fury 3 blade at 5800 and 68 loaded...