No just make sure you go as far foward as you can the floor is real thick so have a good jig saw and new blades will try to add picture Wednesday.
Type: Posts; User: Jeremy Baker
No just make sure you go as far foward as you can the floor is real thick so have a good jig saw and new blades will try to add picture Wednesday.
are you looking for lug pattern or size of the hub?
I just did my 200 super pro I will see if I can get a picture for you was very easy with the template they sent.
Same here just nice to know everything is good and forsure worth the $250 from European Marine
I just installed one and it's a great item. Like knowing am not driving the boat and not knowing about any issues that may be going on wish it had digital water pressure read out. But its a cool item...
computer to set what I adjusted the throttle cable and hotfoot to make sure everything was where it needed to be. throttle plate was opening as should sorry I should have been more clear
I ordered a new 24p tempest will give it a try.
I checked and made adjustments
What do you think my rpms would reach with dropping to a 24p
25p tempest plus 5500rpms I did notice today that the hotfoot was stop pedal about a 1/4 " short so I fixed that maybe that will get me to 5700
I have a 2007 super pro 200 with a 200hp optimax 10inch plate want to buy a fury trying to see what's more recommend the 3 or 4 blade let me know yalls thoughts.
I think I may have found a issue with the low RPMs I thought about checking the hot foot limit bolt and adjusted it i made a Mark on cable WOT before I adjusted anything and I gained another 1/4 " of...
yes need more info but what gaboy said hard to beat a tempest prop.
I have a 200 super pro and my tempest brings the bow right up.
What is the water pressure and rpms???
I was thinking it was related to the speed tube yes I use gps.
I just got my vessel view moblie hooked up and had a few codes one was the piolt sensor not working probably also had it tell me check oil level but both tanks are full and trim sensor not probably...
yes all done this year pretty sure I don't have any engine issues I think with the load and low pro shaft height I need to come up some put I received my vessel view mobile today so I can check make...
Looks like it's a pretty new grey line the letters and numbers are either a dark blue or black.
25p
Will have to check and see if know it's a big black hose from tank to bulb and grey line from bulb to motor will check and see on the blue or orange
procraft super pro 200 not really a performance bass boat but a nice solid boat tempest run great and excellent bow lift would I expect any thing better with a fury 4 blade or perhaps a fury 3 up for...
I bought boat used lines look good I run ethanol free fuel with all the quicksilver fuel additives motor runs like a top. I ordered a vessel view mobile so I can confirm the numbers.
just me full tank of gas full livewells and fishing gear 5350 to 5400 rpms around 66 to 67
Thanks that's all I was asking I know how to adjust and setup I was just ask the in general what should be the gain in rpms with the adjustment.
2007 200 super pro procraft 10" plate it is 4" below pad currently turning 25p tempest at 5400 rpms running 66-67mph water psi 25 to 30 I should be getting around 5700 rpms