Search:

both carbs are getting fuel.
i have a pressure gauge on the way.

cant find my test kit. ill get it done asap and post. I had an old 70 hp evinrude once that had a float needle stick a few times. started looking in that direction. thanks for the reply.

here are a couple pics.488841488842 you can see 3 cylinders and only 2 intakes.

I will guess that the faint click sound was the bad connection giving out. you can check the voltage on the hot side of the starter. it might be fine., but once you hit the ignition, it will drop out...

hi guys. it's been a while since i've owned a mercury. thought I'd see if anyone here knows the issue im having. Its a 1988 60hp. thats three cylinders. but it has two carbs. the upper cylinder is...

I think i Found the trouble. I took the lower off and inspected slowly and compared to the old mid-section and found that my new motor is missing a short plastic tube that seems to fit into the top...

I'm planning on pulling it back off, but I'll wait till after you respond cause I could use the help to know what to look for if its not obvious. Thanks dale in Va.

I hooked the hose like you said and let it run for a few minutes. It flush fine. Then put the puffs back on and still nothing. I remember getting an odd sound as it started yesterday for just a few...

So I just got my 96 150 all together and found time to try and crank it up. In the process of putting a lower from a 98 175 ficht on to this 96 150 evinrude, I did put a new impeller in. I can't...

All is well. The plugs were behind a plastic cover. Never had a problem.

The plugs were under a plastic cover. All is well in evinrude land.

Now that's the tip I was looking for. I suspected something like that. Nothing on this harness has been spliced or rigged, so it looks original. Do you recall how you got your hands on said adapter?...

There are the usual three pin and two pin plugs, then there are two six pin plugs. Not home now to get the colors. I wonder if I can post a picture on here? That might help. Thanks

I took the 98 175 ficht off and left the old controls on there. I installed a 96 e150. The ficht controls have two other plugs not on the carb motor. I hooked up the typical plugs and the trim on...

I took a 98 175 ficht off and put an E150 1996 on. The 96 has typical connections but the controls on the boat have two other plugs. Guess they are for that ficht system. Not able get the trim on...