Search:

Yes, I took the water pump off. While I was manually moving the gear selector pin right, center and left while spinning the shaft I noticed that that pin would move up or down about an 1/8 of an inch...

Prop shaft seems to check out, I measured with a dial indicator. Dropped LU. When spinning the pinion gear in neutral, it and the ring gears run smooth and free. When put into gear (forward or...

In neutral, the prop is difficult to spin in the clockwise direction. Every quarter turn it gets really stiff. It does spin more freely in the counter clockwise direction without the extra...

Had the same trouble with my 2012. Touchpad was not the problem. Replaced the module that you checked and that cured it. No trouble since.

I have a 2012 Z9 DC w/250.
36v Foretrex
2-HB 998
smart craft gauges
Keel guard
4 wheel disc brakes
New maxxis tires (100 miles on them)
led deck and nav lighting.
Lock n haul transom saver...

Will post serial number and a picture when I return home. Sorry for not reading instructions before posting.

I have found a hair line fracture about 1 inch long. It is about 2 inches up the side from the skeg. It is leaking oil. About 20 drops in 36 hours.

Question: something like this repairable or am I...

I used to get much more lift. All conditions are the same as far as weight and distribution. Just less speed I can get more rpms by moving up but less mph. The speed loss is a result of drag from...

Congrats and WOW to the speed. Gonna need your setup!

I believe I am getting about 14% slip where I used to get 9 %. Could that be from cup loss?

I have ran the plate from 3.75 to 2.75.
@ 2.75 I do increase rpm but lose mph and 3.75 she plows with current prop.
3.25 has been the best for 1/2 tank or less and 3.5 for full to 1/2 tank. I have...

I seem to have lost a significant amount of bow lift.

2012 Z9 w/250xs
5750rpm
68mph
3.25 below pad
25 fury
1 guy, 1/4 tank fuel, medium tourney load.

With 2 guys rpms decrease by 250rpm...

Absolutly fantastic boat dealer and best service department on the planet, period!
P.S. choose Lake Austin. Double digits on the chew!

I do. 2012 Z9.
Why? What's up?

I was getting the same lines with my HB. I was mounted right of the JP and 3.25 inches below it. Just moved it to the step with the plug, today. That is where I had my 997 transducer on my '10 Z7. I...

You need-


STL36/37 Series


Waterproof LED Aero Pro Over 80" Combination Tail Lights
Made by Optronics
The 36 & 37 determine right or left

My bow nav lights are not working. I noticed the light on the switch flashing then went out. The switch will not light up for nav lights, only anchor lights. Not getting power to bow I guess. All...

I have just bought a white z9. I cant remember the color number. If thats it I will post a picture of mine.

Skeeter only has 101 minn kota, HB 785 and a spare tire. I priced the z8 the same. A z9 is the same price as that z8 right now.

I am looking to buy a boat. I have found a ZX20, dual console w/ 250SHO for $55,900. I have also looked at a Nitro Z8 dual console w/ 250 pro xs for $41,000. Is the Skeeter a better boat? What...

Wanting to buy a boat. Does this sound like a good deal or priced too high?

2008 Bass Tracker Pro Team 175 TXW 18' boat. Comes with a like new 60hp Mercury 4 stroke engine. The motor has maybe 60...

I am looking at a boat with this motor. It has 60 hours on it.

Are there any known problems with this motor?

What octane fuel?

More or less maint. than a 2 stroke?

All opinions are...

2010 Z7
200 Pro XS
25P Fury-stock
21 p.s.i
5400 rpm
70.1 m.p.h.
no jackplate
3 3/4 below pad
tourney load, 1 person
full tank