I used JB Weld for this purpose in an older boat and it worked well. You do need to be careful not to use too much.
Type: Posts; User: JohnN
I used JB Weld for this purpose in an older boat and it worked well. You do need to be careful not to use too much.
I get in the boat for launch launch then use the remote to park/hold the boat away from shore or the dock. This method work with any ipilot remote trolling motor. As much as I love the idea of not...
Shoot - I was thinking the solix had HDMI. Guess I’ll have to look into networking options, which will probably be cost prohibitive (my network hub is full).
I’m thinking about putting a display on my passenger console simply so the passenger can see what I see on my solix. No need for any functionality other than HDMI display. Obviously, it does need...
Try discharging the battery (running something off of it) for a bit to see if that gets it to accept a charge again.
I have the exact same battery on the exact same motor, and I bought it from Drewcraft. Don’t think twice, just buy it. I’m running a 15” and two 12” screens plus accessories on mine. Very happy.
I just installed a Target Lock adapter kit for my mega live. In case it matters, I bought my live transducer right when it was released. The Target Lock came with a power cord that is a little...
Thanks for all the responses. I will definitely try each suggestion out. I just have to get back on open water to try it!
I appreciate that response. The unit was reading the depth correctly at about 10’ so I’m thinking it must be something else.
I have a solix network - two 12’s on the bow, a 15 on the console, ultrex quest, 360, mega live, all networked through the black (not new/clear) Ethernet switch. On the bow, one Solix 12 is...
I have mega live and livescope on my boat. Livescope produces significantly better images for me. That said, I just picked up a targetlock now that the price is $999 and I think that will cause me...
I don’t want to hijack the tread, but since there are solix guys looking at this … how does one set up this view on a solix?
I run three solix units (one 15 and two 12's) along with mega live and mega 360 off of my starting battery (which obviously also powers the live well, lights, etc.). It's an Ionic 125 lithium...
I have 10 gauge wire from the battery to a main switch, and from that switch to a fuse panel at the console to which I connect the console devices' power cables. Then I run 10 gauge from that panel...
Looking for Mann's Hard Nose Swimshads in the 4.5" size, ideally the blue back color.
sorry - wrong forum
Looking for Mann's Hard Nose Swimshads in the 4.5" size, ideally the blue back color.
I’m mounting my mega 360 on an Ultrex quest. It’s a fortex 360 model so I have an adapter bracket that give me good flexibility in terms of how deep I mount the 360. Looking at some pictures, it...
Mine is out of warranty so I’ll be fixing it myself. Thanks for the tip on the loctite.
I did screw the shaft back into the arrow and it pulled right out. Thanks again, Wayne, for that info. ...
Thanks, Wayne. I got this Mega 360 when it first came out. The rubber grommet doesn’t seem to be vented. The shaft definitely unscrewed from the pointer. I’ll try removing the screws from the...
I’m transferring a mega 360 to a new boat and in doing so discovered that there is water in the top of the unit. I removed (unscrewed) the shaft from the head and dumped a bit of water out. You can...
@mahomee that’s exactly what I need to do with my footpedal. What sort of material did you use to raise the buttons?
If you are at 13.5 and 13.6 you are good to go! Letting them sit in parallel will allow the voltage to equalize across the two batteries, but you’re already there.
When this happened to one of mine, I just ran a depth finder for a few minutes off the battery that dropped voltage and it popped back up after a bit. I think I had the charger running on it at the...
I have the same batteries exactly. The BMS does have something that causes the voltage to drop when it hits a certain point without a draw. I thought there was something wrong with mine when new,...