looking to get my boat recarpeted. Anyone have a good recommendation in the durham greensboro area?
Type: Posts; User: Stratosone
looking to get my boat recarpeted. Anyone have a good recommendation in the durham greensboro area?
I had to replace mine and the replacement piece is no longer plexiglass, its much more durable and probably won't ever break again. The $47 is the way to go.
Thanks to all that fixed it...
Forgot it'd s 2000 Mercury 25 hp 2 stroke, serial no. 0T002163
Sounds funny but thats how it acts. Only when slowing down or after idleing for a long time. I can also get it to do it, if I goose the throttle quickly. When it happens if I hit the throttle...
Sorry for your loss, I know how hard it is to lose someone great in your life. You and your family are in our prayers.
Don: OK so I connected the trim motor to a 12 v power source and it worked, reconnected the bullet connectors cycled it 5 times and it quit again. Unplugged it reconnected it to the power source it...
Thanks for the info. Will check it out this morning.
There are three relays under the cowling side by side, do all three function with the trim?
dead both ways.
Have had no problems since it was new got home yesterday, trimmed it up to back it in the garage and when I went to trim it down it was just dead. None of the trim switches work, the relays click,...
Lee:Will bring it in this morning to drop off....See you guys in a little while.
Don: Its a 2009 and all of the coils were replaced two years ago with the new style ones. Motor has been running fine until today. The motor starts and runs fine for about two miles and then it...
Thanks will order the parts.
Don:
With your help and parts rebuilt carb last year and it runs great, started having a new problem. While fishing when I restart the motor after its been sittting a while, the motor starts but...
Just moved to the area last summer and had the same issue. Found an Hoa that had one lot that was big enough to build a a home for my boat on. Made HOA approval of this a contingency on the sale...
xskeetshooter: What are you using for bunks. Had to send my boat back to the factory for gelcoat blisters, it was ugly....Luckly Triton repaired it under warranty had to do the entire bottom of the...
now that you have used them a few times, do you still like them. Do they leave marks on the fiberglass??
Don: Got the parts and put it all back together yesterday, paying attention to your advice. It purrs like a kitten again. Thank you for the advice and thanks to Ronda for getting me the parts.
+1 for worldwide...
OR315204
I took the carb apart one more time, found a couple of things, ordered some gaskets and a low speed jet from Rhonda and we'll see if this helps, if not, its back to the dealer...wish you...
Don:
Motor runs fine a wot throttle, but it started idleing rough. I can pull the top plug wire off and it makes no difference to it is only idleing on one cylinder. Cleaned carb, replaced fuel...
I have found two props that work best a 26p fury holeshot is awesome, will run right at 80 with a medium load 77ish loaded. Also have a 26p Razor 3 holeshot is slower, but with a light load have...
I am from Wisconsin and lived in Suffolk, VA. Once you start fishing here you won't want to go back to the midwest. Not only is the fishing great, the fish are bigger and you can fish year round. ...
Shouldn't have to do anything for about 3 years. Once the oil turns black its time to change it out. How depends on which hub you have. I have an 09 201 xle and it has the hubs with the rubber...