90 p2 with the old yellow pumps ,I need a new fill and drain valve,what do I need?
Type: Posts; User: just fork
90 p2 with the old yellow pumps ,I need a new fill and drain valve,what do I need?
I am working on a 50 hp honda baz25-8500 408 . there are 2 small black hoses that are open on the end but have a plastic t fitting part way up the hose they start from a fitting behind the manifold...
I have a merc.150 hp engine which I will most likely part out as there is no title,it has been in storage for about 15 years ,the only ser. number I can find is 39 sm1-89, I do not see a welch plug...
bullet boats uses some kind of plastic hose in there rub rails,they have it in a few colors,look on there web site
will the dragonfly 7 pro keep the navionics+ map in its memory or does the sd card have to be in the unit?
looking at 7" striker or echo map 7"which would be better for in hull mount of the transducer?i mostly fish fork but have had enough of breaking transom mount transducers .I fish lots of deep trees...
good solid reel ,tune and spool bearings,then i call mine poor boys calcuttas.
i have one of the exsence dc reels,and a bunch of scorpions,the exsence is the best reel i have ever used !
get one of{ lureparts online} catalogs they have more parts than anyone else
I put the exsence reel on a g.loomis mbr843c gl3 rod ,this reel is super good ,smooth and will throw a 1/4 oz or larger lure a looong ways ,the dc is not to hard to use still getting used to it but I...
no replys,i must have the only rod like this??
getting a g.loomis mbr843c gl2 ,what techniques are the best ones for this rod?
thanks for the info,i am looking forward to getting used to it if I can keep my thumb under control
I have about 12 jdm reels mostly scorpions all from Japan so I know what I am getting.
I have a shimano exsence dc reel on the way,i know it will have a manual in Japanese,does any one know where to get an English manual,not new to jdm reels but it will be my first dc reel ? so I will...
can some one post the hull differences in the newer bullet models?
I meet him a few times,he sold the club I was in at that time a pad boat for cost as first place at an open tourney on lake Tawakoni.good boats except for the bow design which if you remember was...
skeeter made a tunnel hull back in the 70's..a small texas co. renegade made a tunnel hull about the same time
is there a way to know what the differences are ,and what the changes are on my hull ,good or bad..my hull # is basw3164k091
is the hull the same on the newer p11 as my 1991 p11??
looks like we may not get any answers to the post
I have a 1991 xr4 which runs great on the muff ,would I see a power increase by removing the idle stabilizer, and changing the lower unit to a large hub unit,are these motors a reliable motor??.still...
I have looked all over this motor and I see no place to install a temp gauge sending unit,anyone know ???
I live and fish lake fork and her stumps are very hard on transom mounted transducers.
has anyone had any luck mounting a dragonfly 7 pro transducer inside the hull ,boat is a 91 basscat p 11..or info on how to do this and make it work???