Search:

Thanks for the info guys

Per Lou's thoughts has got me thinking... I know my friend who pasted has owned the boat since new and took excellent care of it... But ive never owned a yamaha and did a little research about what...

That's a good point.. there's is a lot of set back.. I'm just lookin for 70... and I think it's totally possible with the right prop..

I just trimmed the motor up to where I run it on the gauge for top speed.. and then marked the trim rams... there's 1 1/8 to go up on the rams still.. so I'm not over trimming the motor...

I...

Forgot to mention.. I also get the exact same results with a 200 pound passenger.. slower hole shot.. but same top end results..

i don't really go by the trim gauge... last test i did i ran it to max speed.. then shut down and didnt touch the trim till stopped.. then trimmed up till off the trim rams to get idea how much...

I have tried setting the plate 1 inch up which would be 3 3/4 ptp and also 2" up which would be 2 3/4 ptp... same except hole shots slightly slower.... revs to 6000... but still will only take...

Let me know how it goes.. Not a lot of Z19's on here.. I've search a lot looking for setup info... Curious what you numbers are...

I can do that easy with the plate.. going up 1 inch brings the rpm up to 6000... but no increase in speed.. I prefer to be a little low with the ptp height at take off then raise the plate... I...

2006 Ranger Z19 DC Setup/Trim Question/Crazy Bow lift
2006 Ranger Z19 DC
2006 Yamaha 225 hpdi VZ225
Bobs 8" hydraulic Jackplate
8' power pole
4 31 series agm batterys
36v 112lb fortrex

I...

2006 Ranger Z19 DC
2006 Yamaha 225 hpdi VZ225
Bobs 8" hydraulic Jackplate
8' power pole
4 31 series agm batterys
36v 112lb fortrex

I have a new to me Ranger i just got do to the passing of a...