Looking for any information on this boarding ladder for my 1993 Stratos 201 pro. Pic is of another 201 pro. Thanks.
Type: Posts; User: jagert59
Looking for any information on this boarding ladder for my 1993 Stratos 201 pro. Pic is of another 201 pro. Thanks.
Size?
Your motor should be able to be started and run without the safety lanyard connected, it should however shut the motor off when pulled while the motor is running. The ability to run without the...
Thanks! Any adjustments needed after replacing sleeve?
2000 Johnson 225 J225HGLSSC G 04817087 Looks like the sleeve is missing. Pic attached. If I need one is this the correct part number? 0432639
Thanks!
Thanks, good to know
Does the charge on the run system work with motors that do not have an alternator charging system? Like a 2000 Johnson 225 with a stator charging system?
Thanks
Not sure if this will work on your motor, but it's listed in the Motor parts area...
http://www.bbcboards.net/showthread.php?t=1188387
Is this a tandem axle trailer?
Well I bought a set of Pentalobe screwdrivers, the largest size I can find via a Google search is a 6PL and it is too small. I would like to have the correct tool for adjusting these idle screws. ...
I tried every small allen I had both metric and standard and none of them worked, only thing I was able to get to work was a T9 torx, not saying you're wrong, just that's what worked for me. Thanks...
Actually was a Torx T9 FYI
So in this hole? What kind of wrench do I need?
411456
The circled one in the pic? If that's the correct one they're all tight and when I loosen them 1/2 turn they seem pretty loose like they won't stay only a 1/2 turn out.
411451
Thank you Sir!
Which is the idle jet? I don't have a service manual for this motor yet. Thanks
I have a 2000 Johnson 225 J225HGLSSC that will start right up cold, will run great to the first fishing spot, but after fishing for a while it will start but when I attempt to get it up on plane or...
I have a 1993 Stratos 201 Pro XL that came with a single axle trailer. I recently added a 6" jack plate and upgraded from a Johnson 200 to a Johnson 225. I don't believe there is much difference in...
Thank you Sir!
Thanks for the reply, I thought about the small hole and wire, but thought maybe someone might have some prior knowledge about the amount of clearance.
Have a new to me 2001 Johnson 225 HO and need to know what minimum/maximum water pressure I should be seeing. Thanks
What is the ohms range that I need for replacing the fuel senders on my 201 pro? Thanks
How much distance is there between the bottom of surface where the seats mount ant the top of the fuel tank? Would like to know how long of a screw I can use to attach my seats. Thanks.
Thanks for your opinion, means a lot. Purchased it today got it for a good price, looking forward to getting it back and on the water.
Looking at a 2001 Johnson 225 to put on my boat, been told compression is 85 on all cylinders, is that ok? Also any opinions this motor good or bad? Things to look for. Thanks