Thanks gearcaseman. Motor was tilted slight. Will tilt up. Shift rod is just to the right in vent hole, maybe stuck to rod.
Type: Posts; User: azmick
Thanks gearcaseman. Motor was tilted slight. Will tilt up. Shift rod is just to the right in vent hole, maybe stuck to rod.
Is there a potential of damaging gears if not able to get out or will gears grind it up must be softer metal?
Well, no luck trying to flush it out from pumping oil from top plug. Oil to sticky.
It's been about 6 years since i did a decarb. Only have time to use boat 5-6 times a year anymore. Filled water seperator filter with seafoam ran that through then the following weekend sprayed brp...
After replacing gear oil, i was installing top vent plug. Because white seal washer is a tad bigger then opening, while trying to screw in vent plug screw slipped downward and broke magnet off the...
What is it? I can get this part somewhere? Needs installed after adjustment?
Thanks championman, i seen above about throttle roller arm adjustment. Mine is like photo one. It has a torx tamper proof screw which i don't have. Would that be worth adjusting?
Engine has always ran great. Just recently experiencing after shutting engine off to fish it wants to stall when put in gear. Now have to rev engine up a few seconds before shifting into gear. I've...
Have a 2005 187 DCX Champ. Using a shoot through hull puck ducer now but with senitivity all the way up it still lacks performance. Changing to a skimmer ducer on transom but fear the thought of...
Have a 2005 champ trailer, took to big o to re-pack wheel bearings and replace seals. New seals leaking, took back to big o and replaced seals, still leaking. Of course big o threw away original...
So sad to see a Champion with Stratos on the side. Atleast i bought mine in 2005 and have the 30th anniversary edition. Love my Champ!!
Thanks bassmiester, I thought it might of been an industry secret.
Thank you seahorse i will remember that
Thought this was a pretty simple question. Before i take apart something i don't have to, just wanted to know if flywheel cover needs to come off or do i need to drop starter to lube pinion shaft?
Where i live is an hour drive to find Johnson/evinrude 2 stroke oil. Our walmart carries gallons of Quicksilver. Haven't tried it yet but it also says helps prevent carbon build up. Would it be as...
Is it difficult to lube pinion shaft on 2005 J150PLSO starter? Ordered bendix lube but not sure of steps to get to it? Any help?
Have a 2005 J150PLSOE. Is Lubing stater bendix difficult on this motor? Would i need special tools? Seen somewhere about timing sensor on flywheel cover. Would cover have to be removed or starter?...
Have a 2005 J150PLSOE, was at lake a few weeks ago and engine stalled 3 times when unloading and leaving dock. After getting out and blowing older fuel out of engine, seemed to run fine after warmed...
2005 Johnson 150 J150PLSO
http://www.bassboatcentral.com/smileys/popcorn.gif http://www.bassboatcentral.com/smileys/popcorn.gif
Thats not so, my manual says to use XD 25. Have not even ever seen XD 25 so i use 30 or 50 whatever is available.
Can you have to much stuff in gas tank? Can i put 2+4, carbon guard and evinrude fuel system cleaner in at same time or use one at a time?
Yes have hydraulic steering. Maybe just not used to feel. Raised it to 3.5 and while at bartlett a few weeks ago coming into yellow cliffs going up river just seemed kinda stiff making the turns so i...
187CXDC/Johnson 150 not the fastest but oh what a smooth and dry ride!!
When we own the best, who cares about the rest! http://www.bassboatcentral.com/smileys/smile.gif