Search:

Has anyone ever removed the tach from the late 90s 201. I need to replace mine and noticed that there is no bracket on the backside of the tack holding it into the dash.

Didn't know the tach was an issue until I got it back.

I just re powered my 97 201 with an 07 250 HPDI. New bolt motor so I have to break it in. Problem is, my tack is sticking when it gets up to 3k rpms. I'm doing the 4K rpm break in now but was...

Thanks. I've been talking to Mark Croxton. He suggested I try and fine a 27 T1.

Re powering my 97 201 with a 250 HPDI. What's the best prop for that combo and a good starting point for engine height? I had a 6 inch hydraulic plate. Thanks

Any idea on the sludge? It had been flooded for quite some time before I got it started yesterday.

My water pressure gauge read 35 PSI the entire time. But it's also possible there is an obstruction given me a false reading.

I finally got it started yesterday and decarbed it. When it did start I had a bunch of oily sludge come out of the prop exhaust along with a lot of carbon grit. Now I'm getting a water temp alarm....

Got this a month ago. Started and ran great on test drive. 1st time out had a tough time cold starting it. 2nd time out was even worse. Haven't been able to get it started since then. Cranks and...

Just picked up a Stratos 201 with a Rude Vindicator 200hp. Both 1997. Any simple mods that will keep this motor running smooth and for a long time? Not sure on the total hours but it runs well and...

Ran the boat last night. The motor is not lugging. The tac needle gets stuck at 3000rpms. Ran 56.6 with 2 people and 59.8 solo. No bow lift what so ever. The prop definitely needs re worked. The...

What's the best 2 cycle oil to run in a 97 Rude Vindicator?

Compression was 90-95 all cylinders.

I'm looking at pulling the trigger on a 97 201. Boat is in great shape. 2 Helix 9s, new Fortrex, Talon, 200 Rude Vindicator, Detweiler hydraulic plate. Only issue is the plate has a bad pump and it's...

Any wood in a 99 210 or all composite?