Update. It ended up being a loose connection on the network cable, it appeared tight but it had some play therefore it still allowed some communication.
Type: Posts; User: palmorejt
Update. It ended up being a loose connection on the network cable, it appeared tight but it had some play therefore it still allowed some communication.
My 360 only shows half of circle with an image. As the second "bar" rotates around the screen it turns the previous image black. In other words, I only have half of an image in a full circle as it...
I have two units networked together. The console unit will power on the bow unit. When I go to power console unit off it will power off bow unit but console unit stays on. Is this some soft of bug?...
That is incorrect information. I’ve confirmed with Chuck.
They are putting F1’s in Gaston, Jordan, and Norman.
No longer available. Admin please remove.
Low Pro Rod Rack makes one. $135 shipped. I have it on mine. Works well. Shoot me a pm of your cell I’ll send a pic
Thanks fellas. That was the first thing I checked. After 10 minutes on the phone with Garmin and they are sending me a new unit. They didn’t really say how often this happens. After switching from...
While fishing a tournament yesterday my front Echomap ultra 122sv screen just went black. Anyone know a master reset? I’ve shut down the whole system. Unplugged wires and still black screen. The...
I’m doing the same as Brianf on a garmin force. No issues with 360 or livescope. Foot pedal did go bad though on the force.
I did on my last boat 921 pro xp 2019. Worked like a charm.
Thank you. I was planning to call Garmin on Monday. I posted this thinking I was missing something.
Unit says 0 quality when calibrating have tried several times. Any advice? Yes, it is on a nemea network obviously.
Finally got the new Force on, I have repaired the foot pedal several times. I am using battery power. It will work fine then I hear a beep and it looses its mind. It will run all sorts of directions...
Thanks. That’s the only option I’ve found. Ordered it today.
Anyone have a Garmin Force with 360 mounted? If so how did you mount?
You can do this without the switch, it only requires the cables mentioned above.
There is no other mount comparable to Bass Boat Technologies.
Twin Lakes Marine, NC will beat most prices around the country.
Anyone running 2019 921 pro xp and atlas hydraulic jackplate? What setting is optimum for top end speed? Yes I know it will vary depending on load, water conditions, etc. just looking for the best...
I'm having the same issue with a 2016 zx200 with increased weight. I added 36v tm and upgraded charger so increased weight of about 100 lbs to rear. I cannot get this boat not to porpoise below 40...
Randy, Thanks for the advice. Can you explain what is happening? It seems that you believe the increased weight in the rear is causing the bow to lift too much at low pms and creating a see saw...
Recently purchased a 2016 ZX200. I took the boat out once and it had the famous Skeeter porpoise issue somewhat at lower speeds. I then added an ultrex 112 and increased from 24v to 36v and also...
Problem solved. Removed pedal switch and the spring must have been in a bind. Reinstalled and it works fine. Still going to call minn Kota to inquire if there is a update coming.
Just installed ultrex and converted system to 36v. Ultrex runs as soon as power switch is turned on. No buttons are stuck. Any ideas?
Have 2016 with 23 T1