Wow, too complicated for this 80+ yr. old, especially with my health problems. (weak, trouble bending over - but can still fish!) Will take into shop when I have 20 hr. service done in Dec. or Jan....
Type: Posts; User: bobsquatch
Wow, too complicated for this 80+ yr. old, especially with my health problems. (weak, trouble bending over - but can still fish!) Will take into shop when I have 20 hr. service done in Dec. or Jan....
Thank you!
Thanks - not sure if any Vexus area reps around here - Modesto, Ca.
Couple questions: Water coming out of pee hole the way it should but water pressure gauge does not show anything though was working earlier in the day?
Steering is hard...
That Caymas price was a sell price on the 2022 model. Bet the 2024 is much higher similarly equipped now?
Since I'm considering selling my loaded 2021 1880 AVX dual console with approx. 10 hrs - less than 15 (only had out total of 9 times), I also checked web site and came up with just under $54,000. Not...
Thanks to each and City17Banner that helps. T/M was $2300, Graphs were $2200, Quick Step was $600, then a few small items added after purchase not listed here......Thanks again!!!! Also for the...
Appreciate it very much for posting the pics for me.......THANK YOU!!!!!!!
Still would like some ideas re value if I go ahead and sell????
This red/black rig pretty well loaded w/Merc. 115hp with hours between 10 - 15 total as I've had out only 9 times since purchase - original owner. Nothing whatsoever wrong......just in last year &...
Out yesterday and saw after about 15 min. of running up and down speeds took toward highest and at 47 mph (graph gps) the tach showed 6500rpm. Immediately slowed speed way down as didn't like the...
Thanks - a friend bringing his heat gun down to me when we fish Delta this coming Monday. Also used Bassboat Saver on my fiberglass rigs all the time, just wasn't sure would work as well on the...
Never having a hot foot throttle before trying to find out if there is some kind of throttle adjustment. Note last several times out keeping my foot down is very hard as seems to me to be very stiff...
Also might want to look at the Dlx-P Dutton jack (same company) model #22335, has the 8" diameter wheel 3" wide all black. A little expensive but may be worth it. Just not sure if it is direct fit in...
Want to remove the stickers from Mercury motor that the selling dealer put on - easiest way to not mess up paint job? Assume blow dryer heat but think also some kind of chemical might help? Previous...
Appears that last number 22335 is the correct one as previous printout #6851 is not the same as the black jack on his rig. Thanks for that last post as due to my very close "accident" recently I am...
Shouldn't have to do that on a new rig but will. Wonder what would be a better replacement jack that would fit trailer frame good? 1,000# rated jack is lowest I've ever had on the 10 other 18.5 -...
Have had rig out now some with no problems until Monday - when unhooking tongue jack, checking to hear click as well as move it before putting weight on it..........it collapsed to the side the...
Have some pics of my new 2021 Vexus AVX1880 to post but can't figure out how? Any clue's or if possible I can email these pic's to someone that knows how to do it. Looked for ways to get it done but...
How long from time you guys bought your Venus's was it before gift box's arrived? Assume Vexus does that on all dealer sales?
Know I can get the tilt further up one notch if the unit was flush mounted, though I like it as is just wish more room. I'm 6' 2" and getting legs into/under the wheel is probably hardest of any boat...
Thanks for all the info. guys. The 9" Elite FS is mounted against the face plate as high as it will go without covering the plate's mounting screws. The dealer had used the Lowrance bracket to gimbal...
Finally brought home from 1800 mile round trip last week. My Hyundai Santa Fe with 4-cylinder Turbo towed very easily thru 75% of time hills and mountain passes with zero problems. Holding speeds was...
So you just drill hole big enough to install/mount the NOCO plug in area conveniently close enough to plug the charger's cord into it from the inside?
Local - $80 for one color, straight 3" block letters, that's it.......plus at least between 1 1/2 - 2 wks. to get. Seems high to me. Waiting on a "proof" from Daryl now. Thanks for reference.
Anyone get their CF numbers thru an online source? Wanting to get mine and local sign places are ridiculous in prices for the 2 sets of numbers. Have never had to get them myself so unknown best...