Savage on Saturday
Socket size please
2006 opti
Serial# 1b424467
I had to loosen 3 of them it seemed to remove alternator. How do I lodge flywhile to tighten to spec. Thank you straightforward ...
Type: Posts; User: logger93
Savage on Saturday
Socket size please
2006 opti
Serial# 1b424467
I had to loosen 3 of them it seemed to remove alternator. How do I lodge flywhile to tighten to spec. Thank you straightforward ...
What size are the 6 bolts on top that you torque to 160-180
you are not kidding......down 4-5 mph during summer in cali
2006 200 opti
2007 190vs ranger reata
no jack plate
I started with a high 5 25p. Great hole shot.
61.9mph gps @ rev limiter WOT (this is new as after new reeds I picked up 250-300 rpms with...
62 is gps
It spins it currently at 5200 rpm at a paltry 59 mph and a slow finicky hole shot with no pvs plugs
Wondering in i could get pitch reduced and add some cup for an acceptable hole shot and pick up...
What work if i may ask. i have a 25 tempest plus that i am wondering can be worked to power a 200 opti on a reata 190 vs?
317046
79 ranger i/o
470 mercruiser...."has a knock
1300$
Did it on my 190 VS
6ft 6in rod tubes not in way
You ever get prop dialed in snowedin3
Be wary of it of it has a force engine.
I have an 07 190vs. The motor question is one of debate. Probably real economical, but most 180's have a 150. Depends on your intent. The ski locker can be converted to rod storage as the rod locker...
I did not gleen the 98 was paid for. Making payments on a 98 is not ideal. Make payments on something from this century if you can manage the ducats.
if you want custom check the mod in Tin Boats. I heave sen his work ...solid
Checked the trolling motor shaft for kicks yesterday. Found fishing line wrapped on it. Decided it was time to pull the 25 p high five from the back of my reata 190 with 2006 200hp optimax. While I...
Find the mod(junior) of the tin boat section. I have seen his work up close and was impressed.
Rpm are 5450 wot. Got a line on a tempest plus 21p. What do you think. Probably send to you to beat some truth into it.
swear to god, this idea has come to me in the last week....tired of rod tips hanging over on my 190vs.....partially inspired by your splash well modification... my concern was once in a while I take...
Thanks for info on mike....I was ready to tow him in if need be...but the ol captain kept his wits about him
Ya thats me. I fish pretty regularly with Mike. I appreciate him reaching out to you for info but I think I got this one licked. I will email you if still have problems and moving into poppet valve....
Following a couple trips where normal starting temp was never achieved, I decided to follow the sticky up top and check the stats.Water pressure at4k rpms was20psi with a temp of upper 90's, but...
190 vs has 25 p high five. Great for tubing want more top end for fishing. I have heard tempest plus but what pitch? suggestions? no jack plate.Thanks in advance.200 opti
GENTLEMEN,
Checked fuses .....good
solenoid makes phfft noise in reverse
Turned out that 7blade to 5pin adapted had wire loose internally.
Thanks for all the replies...Joe
Larry,
Last night I noticed backup lights not comming on leading me to think about the problem being connector I have 5 flat from trailer to big rounf one going to truck.
my trailer locks it breaks when I back up in drive way. no problems down the ramp. the tiedown system has a tab to pull down to release emergency break but I can't get it to disengage. when I take...
My knowledge of props is very limited as eviedenced by my running the high 5 still.. A 25 p tempest plus would give me better top end? I assume I would lose some hole shot with the trade?
thanks in...