Looking for a MK Powerdrive 24v 45or 54in shipped to 93611.
Type: Posts; User: bunz559
Looking for a MK Powerdrive 24v 45or 54in shipped to 93611.
Looking for a MK Powerdrive 24v 45or 54in shipped to 93611.
Any update on pictures Savage? And maybe list of components you used? Wanting to do an air/fuel test but boat shops are booked out months, being boating season, and the Mercury setups are an arm and...
Looking for price quote on Terrova 55/US2 54' shaft shipped to 93611
Looking for price quote for Terrova 55/US2 54' shaft shipped to 93611
Purchased my 05 185vs with a 175 Optimax during the spring. I recently put on a 6 inch Slidemaster jackplate and have it set at roughly 2 3/4 inches prop to pad. I am running a 23p Tempest. On slick...
Just to follow up for future folks who are researching. I've worked with Don and we have figured a solution. Much thanks to him. Probably a hundred emails back and forth trying to figure out what's...
Thanks much guys! Appreciate the input.
I have a 2005 185vs. Unfortunately it's late in the week and day and Ranger Parts is closed. Can anyone help me determine what size hub I'd need to replace the hubs on my trailer?
424037
I have a 2005 175 Optimax and cannot seem to get the fuel filter off. Is there a tool or trick to getting these things to rotate so I can replace it? I've tried 2 different strap wrenches and cannot...
How difficult is it to install? Is it something a professional should tackle?
Yup. Last weekend I took her to the lake and no difference. Low idle PSI and normal PSI when giving her gas.
Thanks Don! I've actually been communicating with you through emails. I've just been keeping this thread alive as well. Yes gaskets were changed. I will be reinspecting the gaskets again this evening...
So today I installed the poppet accordingly to the manual. Slapped on the muffs and water pressure reading has actually gone down. Now it's reading .3-.5psi. I am completely stumped now. I have...
Awesome! Will follow up with results.
One other thing, I did not add this to this thread since I wanted to keep it separate as it is a bit off topic from the water pressure issue I was having....
I think I may have found the problem. After further inspection, my poppet was assembled completely incorrectly. When I put it back in after replacement, I put it in as it came out which was wrong. I...
With no throttle applied, and just the engine on the Smartcraft is showing between the .7 and 1.X. I'm kind of stumbled as well.
So I got the boat in the water today and PSI reading changed. Gauge on dash would 0 when idling but as soon as moving it would begin reading normally. The Smartcraft would read anywhere between .7...
Ok, so I installed the new water pressure sensor and the Smartcraft has changed its reading. I turned on the motor with muffs and the Smartcraft is reading .7psi. I should add, my analog gauge that...
So I finally received my parts from you guys. Mercury has been back logged on a few maintenance parts but I'm glad to be able to get to work. Question, the sensor that was sent to me is black as...
Thank you for clarifying the Pitot Sensor. I sent an email tonight for some part quotes referencing to this thread along with a few other maintenance parts. Will post results if this works for future...
I ran Don's test and looks like the sensor is no good. Unplugged the grey tube and Smartcraft still reads 40.x. Please reference to photos below and correct me if this is the wrong sensor. I had to...
Thank you for the advice. Will be in contact if parts are needed.
Thanks for the responses! Where would the water pressure gauge be located under the cowl? I have a manual, but just cannot find anything on the location of the water pressure sensor. Why I'm...
Hello board, I recently purchased a Ranger 185vx with a 175 Optimax that came with a Mercury Smart Craft. It is the older black and grey square unit. The Smart Craft water pressure reading is showing...