Search:

If this is the first rod to build don't dismiss using one of the MHX kits to get started. It will have everything you need and the proper size along with the stands, rod turner etc. and alot less...

Pat,
I don't remember the mans name.

A follow up on my prop search,
I talked to Mercury (after all, they have many mercury pro's running this boat) and went with the bravo 1 xs. Hole shot is great, using my merc monitor holeshot...

Hang in there. I've called them twice in the last two weeks to get a problem resolved and they have gotten back to me both times. Takes a while. They must really be busy. Good luck

Ok, Picked up a 23 B&B tempest plus to test from Steve's prop shop at lake fork. 69 mph gps at 5900. Hole shot good. Went back and reran the fury 23 and ran 70.5 and 6050 rpm's, better hole shot....

Just a little follow up. Went out this weekend and have vessel view now, so I can be more percise, and with my 25 tempest boat ran 69.8 and 5480 rpms with motor at 3 1/4 ptp. Tach show 5700, i'm...

I had the same thing happen to me recently. My HDS live 9 would just turn off after 20 or 30 minutes. Then it would start turning off every 10 minutes and then sooner and sooner. Watched voltage...

You just have to beat on it. I used a sledge hammer and a steel pipe the first time. Ken Smith fishing on you tube shows how to drive it out. I would never have done that with out seeing it first....

Haven't stretched it out yet. 70.4 gps at 5900 rpms. Water was a little rough and not enough hrs. on motor. really liked the lift with the tempest. With three of us in the boat Wednesday opened...

Just got a new Z21 with the 250 four stroke and I'm looking for help with which props work well with this boat. Fury 23 came on the boat and it has no lift and is alittle small I think. Put a...

Way above my pay grade. I guess i'll just do it one at a time.
Thanks

moved way points over to my new to me HDS 12 live. I would like to change the way point symbol for a large number of way points. Is it possible to do as a group or do you have to change them one at...

serial number 2B697308.
What hub kit do I need?
What do they cost ?

Mike at Lake Park Marine in Valley View. Been using him for years.

Thanks,
Yes Drew, he told me they would check it before it was shipped and I was to check it before I built on it and if there was a problem to give him a call. Nothing in writing on these blanks. ...

I was thinking of buying a few blanks from NFC. Talked to them and they made a very big point that they do not have a waranty.
Seemed odd to me that they would not waranty material defects at...

Had exactly the same issue and it didn't matter what setting I used it would give me a double numerical reading in shallow water with a hard bottom. The unit would also lose power when ever I ran...

Congrats of the new boat. You'll enjoy the 206. Been running my 2001 206 since 2008 and it has been a very good boat.
started with a 225 merc efi and then changed to evinrude 250 ho.
Boat does...

Violent chine walking can be a sign of a loose connection at the steering bolt. Check the bolt and bushing where the motor bolts to the hyd. steering arm and make sure there is no play in it. Had...

Wire brush. Friend of mine showed me years ago and it will stand up the fibers and make old carpet look almost new again.

Have had that happen several times. 1st, clean the hyd. rams , I use wd-40 and fine steel wool. While working the switch for the hyd. jp start bumping the tilt and trim switch up and down. It will...

It will all depend on what you want and expect from your boat. I don't know what skeeter you had before but I have fished from many different platforms and this is the safest and best riding of all...

The EMM on my 2010 etec 250 crashed and have ordered a new one. Does anyone know if they are repairable?
Thanks

Thanks,

If I wasn't covering the plug with a rag it would make a mess. It had been 4 days since I was at the lake so you would think heat expansion would not be the case.