Search:

Lugging is indeed the term I encountered. How can I assure my throttle linkage is set correctly to know that my engine is going WOT while the pedal is all the way down?

So I'm a fairly new boat owner/operator but I've got a couple questions regarding RPM, trim, and prop to pad. I've read that I should be turning 5800 RPM or so on my motor (in signature). Where I'm...

Judging by the looks of it, it's probably a very very old job. The boat is a 93 model. I'm doing my best to bring some shine to it. I got it on a trade so I've got very little into it right now.
...

Well I spent some hours scraping with a razor blade and sandpaper but ended up giving the Klean Strip paint stripper a chance and let me tell you. It doesn't seem to do anything at all to the gel and...

This is the decision I've made. I added up all the parts and it's nearly the same price to buy the whole thing new.

Now I need to see if I can find a replacement for the rubber cap that went over it.

Ahh. So if I'm operating with a hot foot, I don't really have to worry about it. Got it. Thanks. I've had the thing for two years almost and I still come across things I don't know.

Does anybody know if this is a release of some kind of if it has a purpose? It is spring loaded and I can push it in but can't tell if it's supposed to have a purpose. It has a rubber grommet over it...

I'm looking to put a tray in my boat for my fortrex but I want to know the tray I get will fit the pedal I have and be large enough in case I upgrade to an Ultrex or newer model. Does anybody know if...

Here's a picture of what I'm looking for. Part number 585992
.
526905

I did manage to get the whole thing out but it definitely isn't repairable. I'm wondering if I can replace the insides of the actuator rather than replacing the whole thing. It looks like I need the...

Will a thin layer of brush on paint stripper help with removing the clear? Id like to limit the amount of scraping and found someone in another thread who used a similar product. I assume I can take...

I'm getting ready to start cleaning up my hull and polishing it real good but I've got a lot of flaking and peeling. How do I know if this is gel coat or clear coat and what's the best way to get it...

Hey guys,

I have a 1993 Hydrasports trailer that has surge brakes on it but it needs rebuilt. I think there's a seal or gasket somewhere inside that needs replaced but I really need to get inside...

I figured that would be the case. I'm not a huge fan of that so I suppose I'm going to open mine up and see if I can fix it before I shell out the cash for a new 3 wire. Thanks for the response and...

As far as I can tell, the black third wire I have is ground. The positive goes to the switch. The tan goes to the motor for the fault wires. If the two wire just has power and fault, can I just skip...

Does anybody know if it's possible to convert my alarm/buzzer from the 3 wire pictured below to the 2 wire version pictured below. The 3 wire seems to be a little harder to come by and is more costly...

As the title says, I'm looking for an OMC buzzer. The one I need has two spades and one ground leading in. Thanks!

The 12v to the purple is constant. Wouldn't that mean that the buzzer would always be on?

Key on switch on gave me 12v at purple and for some reason like 7v at tan.

I was prepping to reinstall a VRO and wanted to make sure my alarm was working before I did so. I believe this device to be the alarm. It has a purple wire, a tan wire, and a black wire. I haven't...

You think I'll be able to see on the helix 7 well enough? Keep the 5 at the console for GPS?

Thank you. I assumed this was the case but I just wanted to double check. My friend has a G3N Mega Down Imaging Helix 7. So I suppose I'll have to get that one from him to run with the 360.

So even with one of those adapters that switches from the round cable to the other style, it won't work with my 5? I'm sure that's what you're saying, I just want to double check that the adapter...

So my friend gave me his old 360 since he upgraded to the MEGA with his Solix 12. My question is: What do I need to hook this up to my Helix 5 DI G2 (if it can)? He also has an old Helix 7 DI SI I...