Search:

Type: Posts; User: adepinet

Search: Search took 0.00 seconds.

  1. Replies
    5
    Views
    1,116

    Thanks, I’ll see what I can do

    Thanks, I’ll see what I can do
  2. Replies
    5
    Views
    1,116

    New Mercury 4s

    Hello, I will be taking delivery on a CPO Mercury 150hp 4 stroke. I read that a water/fuel separator is recommended. The motor is going to be mounted on a Ranger 690vs and there really isnít space to...
  3. Replies
    10
    Views
    684

    Thanks for the help.

    Thanks for the help.
  4. Replies
    10
    Views
    684

    But if I wasn’t worried about that I could just...

    But if I wasn’t worried about that I could just use the transducer I got because it can do both?
  5. Replies
    10
    Views
    684

    Soooo... Would I plug the thru Hull transducer...

    Soooo... Would I plug the thru Hull transducer direct time the 1199ci? I ask because I have 2 transducer connections already coming out of the unit. 1 for side imaging 1 for dual beam. I probably...
  6. Replies
    10
    Views
    684

    I didn’t think either but never ran into that...

    I didn’t think either but never ran into that situation before. Thanks
  7. Replies
    10
    Views
    684

    Thru Hull transducer mounting

    Hello, I purchased a 1199 ci hd Fishfinder with a XPTH 9 HDSI 180T Thru Hull transducer. My boat is a Ranger R82. I had pictured in my brain that the first step above the pad is where I would drill...
  8. Replies
    14
    Views
    420

    So I pulls the spark plugs after I ran the boat...

    So I pulls the spark plugs after I ran the boat all weekend and the #2 sparkplug, which was replaced after the rebuild, looked brand new still. It wasn't completely dry but not near as wet as the...
  9. Replies
    14
    Views
    420

    Just an update. Moved the timing around and...

    Just an update. Moved the timing around and didn’t seem to make up the lost rpms. I’m not sure what’s going on. Seems to me that I have a fuel or a compression issue since I can’t get over 5k rpms...
  10. Replies
    14
    Views
    420

    Idle stabilizer is still in place. What is the...

    Idle stabilizer is still in place. What is the recommendations for timing to be set at?
  11. Replies
    14
    Views
    420

    Timing is currently set at 16 degrees. Idle...

    Timing is currently set at 16 degrees. Idle timing was at 4. I will look to see if the module is still installed. Thanks
  12. Replies
    14
    Views
    420

    But I guess my question is, is the timing off 6...

    But I guess my question is, is the timing off 6 degrees? The nameplate on the ecu says wot timing 16 degrees. The manual says 16 degrees. That’s my confusion. Maybe I’m overthinking this whole thing....
  13. Replies
    14
    Views
    420

    The builder said he backed off the timing so I...

    The builder said he backed off the timing so I wouldn’t run it to hard during the first couple hours. I think he was worried since this wasn’t a new powerhead it was a used powerhead that came off a...
  14. Replies
    14
    Views
    420

    Sorry, serial# 0G644227 model- 1-150413U Year-...

    Sorry, serial# 0G644227
    model- 1-150413U
    Year- 1998
    WOT before rebuild 5800 rpms
    WOT after rebuild 5200 rpms
    23p trophy prop
  15. Replies
    14
    Views
    420

    1998 Efi timing confusion

    I realized I probably posted this in the incorrect thread:

    Hello, Iím having trouble understanding what the timing of my 150efi is supposed to be set at. The sticker on the side of the ecu say 16...
  16. Replies
    3
    Views
    196

    I have 10 hours on the rebuilt motor with the...

    I have 10 hours on the rebuilt motor with the timing retarded from the builder. He retarded it 6 degrees he said. Setting the timing at 21, is that at wot? Or cranking and checking it? Thanks for the...
  17. Replies
    3
    Views
    196

    1998 Mercury EFI timing confusion

    Hello, Iím having trouble understanding what the timing of my 150efi is supposed to be set at. The sticker on the side of the ecu say 16 degrees but reading other posts they say 23 degrees. Could...
  18. Replies
    1
    Views
    4,232

    Triton 206 fishhunter motor height

    If anybody has this boat and is willing to share the prop to pad height that would be great. I am running a Yamaha 250sho with a 4Ē hyd jackplate. I feel like Iím too low at 5Ē. Thanks Aaron
Results 1 to 18 of 18