My biggest thing for keeping fish alive is not using culling tags that float. I used TH marine culling tags and i remove the floats.
Type: Posts; User: hyperflow
My biggest thing for keeping fish alive is not using culling tags that float. I used TH marine culling tags and i remove the floats.
I leave mine in for bass tournaments and remove it for pike tournaments, never noticed bass getting worst on one side then the other.
I don't have one under my 21SDC either. I have a wedge sitting in my closet for the last 2 years. I'm running 2 LVS 34's, Won some tournaments 100% scoping. No difference imo.
I'm removing my ghost on mine for a powerpole trolling motor this summer. Lowrance customer service in canada SUCKS.
In canada 95% of bass boats are DC. Very hard to sell a single here. I prefer a single and regret getting a DC.
I had lithium on my 300XS for 7 years, All my buddys are running them on there 250XS now. I'm still running lithium on my 300R. No issues.
I got a SDC, i mounted mine under the passenger side console. Can't see any wires or the black box. I did this for multiple reasons, It moves the weight back and on the passenger side. My bow is...
For lithium never go with what you NEED, go with more then you need. The batteries last a really long time, so when your at the 8-10 year mark then you got less then what you need as the AH go down...
The bravo has a crazy amount of slip. I'm running a bravo on my SDC/300R right now and not happy with it at all. Tournament loaded i'm always around 20% slip.
As of right now my best prop is a BC...
Had pretty much the same happened on mine, Started acting funny. Was the Injector, only had 150hr.
looking for a new or used HDS 10 pro
Garmin recommends 8 gauge wire for livescope if you run the GLS box anything over 15 feet and 6 gauge anything over 23 feet. Seaclear boat harness are 8 gauge wire.
All i know is with 8 gauge i...
I didn't read all the posts, so not sure if this was said. But do not use the boat wiring. Run isolated 8 or 10 gauge cables from the batterie to your units and you will never have voltage problems...
To make a very long story short, i been fighting with this motor since last june. It keeps throwing codes, so far its threw a camshaft encoder code, shift actuator code and a throttle demand sensor...
Has anyone ran a 450R on a bullet? i'm seriously debating pulling off my 300R to put a 450.
Every time i called they made time for me, and i called lots :confused2:
Moral of my story is i had issues with everything, Even my trolling motor. That's 4 independent brands that have nothing to do with each other. I count it as a covid, nobody wants to work/hard to...
My hole new boat experience has been kinda a nightmare. As most ppl know i bought a new 21SDC last year, I never really spoke out about it. My biggest issue is i'm from northern canada, so i can't...
I been running 1 36V since 2013. The only downfall is if your battery fails you got nothing, but if one of your 12V dies you got pretty much nothing anyways. The 36V is lighter, takes up less room...
wow, really sorry to hear that. Was it a personal plane or like a jet?
I ran a hydraulic plate, I would take off 1inch below pad to about level to pad then I would just lift tell i got to around 12-10psi of water pressure. The higher i went the faster it went.
If i...
Only thing i regretted was not going over kill. I went with what i needed AH wise and after 8 years they we're on the weak side, but if i would of went overkill the battery would of still be fine at...
I Ran lithium batteries for 8 years in my 20XD/300XS. You'll 100% loose bow lift and you will have to be more mindful on how you place your fishing gear. When driving alone my port side would lift...
Nitrous, works amazing
Garmin measure there trolling motor differently. A 50" is more like a 45" and a 57 is more like a 52". Just incase you didn't know.