Thank you
Type: Posts; User: double D
Thank you
2014 Mercury 115 EFI 1115F131D 2.1 2B151074 I had voltage regulator replaced around 100 hrs because it was over charging and boat would go into safe mode. I now have 218 hrs and it is doing...
That’s what it was nowakezone thank you
2014 mercury 115 EFI 4 stroke SERIAL NUMBER 2B151074. I replaced water pump and put the lower unit back on and now the motor will not beep or start when I turn the key.
Ok,thanks Lowerider58 for the info
No I’m talking about the drain for the motor oil.
2014 Mercury 115 EFI 2.1 serial 2B151074. My oil drain has started leaking oil. I may have over tightened or loosened it to much over the years. My question is can I just unscrew it all the way out...
Yes the boat had been sitting for awhile so that had to be what happened. Thanks for the information.
Ok thanks for the help the boat is in storage when I get a chance I will run it and check the filter. Hopefully it was just the pressure relief valve.
2014 Mercury 115 EFI 115F131D 2.1 fourstroke serial 2B151074 I changed motor oil at 100 hours I used oil filter 8M0065104. which is the same size that I took off. I now have 200 hours and this...
After being in the shop for a month I finally got the boat back. It was the voltage regulator just like EuropeonAM said it was thanks for your help.
Ok thanks going to the dealer.
ok thanks serial # 2B151074
connections are good.battery fully charged,water level in battery good.
Motor runs fine at idle14.5 volts When I give it throttle the volts go up to 17 and motor goes into safe mode. anyone know what it might be? 2B151074