Search:

I have s ps 21 transom mount. What's the best way to extend the ps21 transducer cable to the bow from the dash unit?

Definitely interested in that.

OK Thanks.
Too bad though. It would save installing a digital guage on the dash. Maybe something for the OEMs to consider for future Bass Boat options.

Hooked up my Ti2 and getting the trim meter reading on the monitor. I have a 12" hydrolic jackplate and would like to get the meter reading on the Ti2. What do I need to get that reading on the...

Does anyone have a picture of the Yamaha SHO engine cover that has been modified with vents. I would like to get my engine cover done this winter. This would help me provide some guidelines to the...

Going with 2 monitors on the console of my 2018 FX. Where is the best location to add power to my second unit so it turns on and off with the perko switch?

��thanks.

��thanks for sharing

For sonar unit I will use it for side scan or traditional and mapping/navigation. Also to run a sonic hub 2 and engine data. The rest of my electronics are not compactable with Lowrance and are...

:thumb up2:

It will be a stand alone unit, so really don't need to link with my other electronics.

Looking to add a Lowrance HDS Carbon 12 or a Elite-12 Ti² Fishfinder/Chartplotter to my boat.Both will do what I want but having trouble making a choice. I am not familiar with these units and would...

Thanks.

Thanks

https://www.lowrance.com/lowrance/type/accessories/sensor-networking-accessories/yamaha-engine-interface-cbl---rd/

Anyone know a vendor that will ship a SHO engine cover to Canada?

Which is the best transducer for this unit? I know it comes with a 83/200 Skimmer Transducer but I was wondering if there is a better one for it. Thinking of getting it as a second unit.

Good question. I would like to know as well.

I use a laptop storage bag with carrying handle. Plenty of padding and can get 2 12 inch graphs in to it.

I know the skeg on the 250 SHO has a slight curve to it however I bumped a log the other day, was looking at the skeg once I pulled the boat out of the water, and could not remember if the back of...

I know the skeg on the 250 SHO has a slight curve to it however I bumped a log the other day, was looking at the skeg once I pulled the boat out of the water, and could not remember if the back of...

So if the skeg is slightly bent to help with steering, is the bottom and back of the skeg still perpendicular (in line) with the motor and shaft?
I bumped a log as well and was having a look at...

Thanks guys. I had a hydrolic jack plate installed and thought the marina might have forgot to hook up something. ��

Just checking my oil an noticed this line coming into the engine area from the tube. It was at the base of the motor sitting there and I noticed the tie, so I pulled it out the side of the engine. ...

TTT. Any resolution on this?