I have two of the Skyline rod brand versions of Slider rods. They are 4' 10"
Type: Posts; User: Wayne P.
I have two of the Skyline rod brand versions of Slider rods. They are 4' 10"
Yes.
Once a waypoint is created, it is a place on the Earth that can be located by any GPS antenna.
It's accuracy when created is what matters.
Will do somewhat OK and less accurate.
The waypoints you mark at the console will have a position error of the distance between the display and transducer for sonar related waypoints.
That error...
The AS GRHA is the High Accuracy GPS antennna that was discontinued many years ago since the AS GR50 was just as accurate. Then the AS GR50 was replaced by the AS GRP.
I see AMAZON has AS GOS HS GPS...
The Humminbird antennas have a 20' NMEA0183 cable that connects directly to and are powered by the displays.
If you want to use a Humminbird Heading Sensor with a Helix, the AS GPS HS has to be at the bow since you cannot subscribe to Heading separate from GPS.
Then for accurate marking for waypoints at...
The sonar screens have a 45 degree polarization. Depending on the sonar brand and its screen, it can be slanted upper left to lower right or upper right to lower left.
Humminbirds are upper right...
That is not the 9 M SIDB Y cable, it is the 9 M360 2DDI Y cable.
It connects a MEGA 360 and Humminbird 7 pin transducer to a Helix.
Both 360's (original and MEGA) are rotating Side Imaging transducers= a left and right SI piezo. As the transducer rotates it replaces one side with the other. If you have a blackout on either side,...
When it doesn't bounce off a frozen surface.
Bass Buster: Scorpion and Tarantula
Display Full, Front, Rear, Left, and Right use both piezos and do the 360 rotation.
Your results reflects your preparation. Read post #2 here----Installation & Networking Information Resource (bbcboards.net)
Add to that to make sure the shoot-thru works before doing the above by...
Should not make any difference what the Display setting is, a failed piezo would do the same for all of them.
Current Repair Fees – Humminbird (johnsonoutdoors.com)
2D/Depth with your installation comes from the shoot-thru all the time. Depth comes from the center of the 2D pulse for all views.
SI and DI do Range.
How did the shoot-thru do when you did the...
Turn on a SI view and use the MEGA 360 for SI and you will see which piezo has failed (left or right).
If you lose the image with the Front view, you have a defective 360.
Supposed to look like this all the time:
https://i.postimg.cc/5tCq10Tq/S00039.png
If you use Isolate Sweep Area and set the coverage area and direction, the transducer sweeps back and forth like a vehicle windshield wiper.
If you use Display, that gives you 360, or Front, or...
The LIVE has to be recognized as CONNECTED and its serial number and software version shown in the Accessory Test menu to do an update. AND you cannot reload the software.
What software version do the Helix G3N's have?
The G1/G2 file is 93.5 MB larger than the G3.
No, the G3 software is a different file and smaller than the one for G1 and G2, just same version number.
No, you cannot use Heading separate from GPS with Helix units.
Your statement "All networked together via Y cables and the network switch" is not possible since there is no such thing as a network Y cable.
That is why this thread got sidetracked.
There are...