Did some reading, checked all the hoses and cleaned the pulse limiter...my guess is the VRO quit; it runs fine if you keep priming it. Is there something else I could be missing before I just pick...
Type: Posts; User: craneage2001
Did some reading, checked all the hoses and cleaned the pulse limiter...my guess is the VRO quit; it runs fine if you keep priming it. Is there something else I could be missing before I just pick...
Well, the sun finally went down so I could get it back out on the water without scorching myself...here's what I found out:
Starts and idles fine. If I reach back and prime the ball until it's...
Here's the scoop (keep in mind it was 90* outside):
The motor ran fine for the quick 5 minute run to get to where I was going. Fished there for about an hour, then decided to make the next 5...
Thanks!
Is there a fuel filter somewhere on these? I picked this up in the spring and figure it might not be a bad idea to change it (since I don't know when it was last changed), provided it even has one...
http://img.photobucket.com/albums/v686/craneage2001/boat/DSCN2082.jpg
A quicking at the ramp, coming in just before dark...
Working on getting a good pic of the boat...I'm looking to get someone to get one of me running flat out; if I find a good one of it at the ramp, etc, I'll take that as well.
Was out on the river late on Friday and the sunset caught the 'Rude just right...it doesn't get any better than nights like that (the fish were biting too...)
I've learned to leave my good camera...
Will do...it's been rainy but I hope to get the boat in the water tonight...
Yeah, mine was like the top pic---hopefully that was the issue. Haven't had a chance to take it out yet; this may help my holeshot issues as well!
Just curious...whats that other roller for?
Thanks...I'll have to see if thats my issue or not!
http://www.bbcboards.net/zerothread?id=11946
My 97 Intruder (175) has been bogging when loading, but I'm not exactly sure what they're talking about...is this the roller they mean?
...
After working in the parks system for a few years, this is usually considered illegal (if you get caught of course, I don't really agree with that rule)...often, they will confiscate/invalidate the...
BTW, I usually solder the joints (can do a flat joint instead of a twist) and yes, the coating material instead of tape is definitely the way to go, especially for watery applications.
http://img.photobucket.com/albums/v686/craneage2001/boat/boat2.jpg
http://img.photobucket.com/albums/v686/craneage2001/boat/boat.jpg
I've cleaned her up and made her my own since the first...
Muchas gracias...
Can anyone tell me or point me to a list of what the various warning alarms are for the Evinrudes? I went for a short test run today and right before I got back I got a beep every twenty...
When you're splicing/connecting two wires together and you have a little bit of wire to play with (ie. you're not down to just an inch or two! http://www.bassboatcentral.com/smileys/ohwell.gif ),...
From what I see for other similar outboards, it seems like 5500-5800 is the upper ranges of safe continuous operation---can anyone give me a definitive answer?
I recently picked up a Renegade 4 blade (part # 175738) for my '97 175 Intruder---according to the specs, the prop should fit the V6 gearcase (which my 175 is/has). However, the hub of the prop has...