Search:

I believe if he has them networked he can still view all sonar on his unit....if 2d shows up then it should see the rest of the sonar.....

2 cars shake up your head....could only imagine what 4 does

Are there any full photos or videos of what was on display at the classic for those of us that could not go?

Was that hair extensions?

You don't say which 93 model.....so the 106 will only talk with the 93 Plus or newer.

Of the 2 mentioned, GT8 is easier to insatll....I have bot in my boat and ended up using the 8....

Now for the posts on trying to get refunds...

Is this the non touch screen model?

That is correct on networking.....the Ultra 2 pick up some new features that are not on the original Ultras....like screen record, saving settings, etc....

The good thing is you can save your settings on the unit for each LVS and when you swap boats, you can change to the setting for that LVS....shouldn't be any issue with updates unless one is lagging...

If you thinking of the 86xx series and they are more than you want to pay look at the 1243xsv....ues you get more "features" but most wouldn't be used on a bassboat....but have better hardware....

Shouldn't be the case either an issue or a setting....

Sounds like you may have other issuses.....same battery on my boat with no issues and also my buddies boat with a Suzuki and Garmin units which is the original 93 Plus....

Like said need the Gateway or Merc monitor...gateway may be a little cheaper but not by much....then need the NMEA network to connect.

You dont have to update and are not "forced" to update....i'd bet there are alot of guys out there that don't update....its your choice....

All transducers must be in the water to get a reading.......doesnt matter what the screen looks like while sitting in your garage

So did you want a unit solely for Livescope or for sonar in the future?

There are new updates posted to website this evening.....
One update is using up to 1TB cards but who would fill that up....

Sho do....

https://live.staticflickr.com/65535/51777147403_0e240c2703_k.jpg

I can double check this evening when i get home as i have all 3 ducers.....

Almost positive that the GT52/54 share the same pattern, dont remember about the 56.

Remove unit from cradle and look on back of unit in the area of the pins.......also, if/when you setup your Active Captain card, it will automatically register them with Garmin......

Looks like click bait to me...

At home I'll remove the plugs.....as for water sitting, its does for all of us, just how they are built....use a towel or sponge to soak water up....

Het you a set of fiberglass stick.....I found that it was easier and straight to go thru the rear light hole....and remove some panels upfront also.....

Pics below, put in a piece of stick, rotate...