PM and email sent…
Type: Posts; User: CableDave
PM and email sent…
Thank you! Should I change thermostats while I’m in there?
Pulled my reed blocks and injectors to be sent off today, while that痴 being done what other parts need to/would be good to change. I知 putting a 4 shutter intake back, and of course I値l need a new...
Ok! Thanks Joe! I’ll try to see what I can find out
Well, I wish I wasn’t here again for this but that apparently wasn’t the issue. New stator checks our perfect on resistance numbers, test and meter performed exactly the same way.
1080 or so (with a...
Thanks guys! I really appreciate it
Rechecked and they were all within 10 or so of what I previously posted… went ahead and ordered a stator
Do you mean that if they are not close to identical it means the stator is bad? I’ll recheck tomorrow, but I’m 90% certain of those reading other than air temp was probably more like 50. Thank you!
Resistance readings on this stator look to be a pretty wide range (cold engine) problem seems to only present when warm but I can’t really test that right now, but of course can do later. Thanks!...
OG803936 if I’m reading correctly is the serial number
I’ll add the serial number first thing tomorrow! I didn’t have it saved like I thought
Running a 99 225 efi on a tr21…for quite some time I’ve had issues with the boat not wanting to plane when warm. Took the boat to a veteran marine mechanic in the fall, replaced fuel diaphragm,...
Sent you a PM ... also call or text 276-365-5037
Thanks Wayne! I値l get them ordered, thanks again
Thanks Wayne! I’ll get them ordered, thanks again
Adding a Helix 12 G2N HW Mega SI at the console where I had an 899. Which Y cable and in Hull do I need? I知 assuming the XP 9 HW, do I need the T model or will I get temp readings off the si...
Is it worth it to put a SI transducer on the TM vs having a linked unit at the console with it? I have a g3 si at the console, but should I spend the extra for another SI up front? I already have the...
I got it... it was a fuse in the battery compartment... strange..
I asked this question on a facebook group also so if any of you notice it there also please take no offense, I知 just trying to find a way to get things in line to do what i have to in order to be on...
I've got a navionics plus card, would probably prefer smallmouth but would be happy with either. Planned on fishing the 19th-22nd. I know dragging a tube offshore was a pretty steady deal , but I've...
Looking at fishing three days this month while visiting relatives in the Fremont/Sandusky area. I've only fished there once about 15 years ago, was going to see if someone would mind pointing me to...
Ok thanks! Looks like it's a bad ground to the sending unit.. there are two green wires coming in, one from each side. I'm assuming that these are the ground wires? Can I run a new ground straight...
Stopped working on the water in the fall. When the key was turned the needle would bounce slightly but not reflect level. Changed the gauge and sending unit with new and now same result. I can move...
You were dead on, battery was too dead for the charger to even recognize apparently. Put a stand alone charger on it and all is well. Thank you!
So after my carpet job I'm having some kind of electrical issue. I had to pull the breaker panel to recarpet undr the console, I labeled each connection and reinstalled the same as best I can tell...