It's probably not able to be calibrated. Mine wasn't.
Type: Posts; User: 5 inthe well
It's probably not able to be calibrated. Mine wasn't.
So if that is for the speedo then where does the line for my water pressure gauge come from?
Bought a new to me outboard that had no setup for water pressure.
I want to run a line down to the fitting I put in the lower unit but
I'm not sure on how to route it. The outboard is a 93 XR6...
Intermittently. I have a miss in at least 1.
Would 3 cooler cylinders by infrared temp gun indicate a bad switch box? My battery is still being charged indicated by 13+ volts while runn
Is that originally a threaded fitting or pressed in?
It's a fuel line fitting. I followed it incorrectly
http://i66.tinypic.com/2aey1c8.jpg
I'm taking apart my carbs off my 93 XR6 150( serial #0d212925). In the process of taking the first
one apart, I twisted off the fitting that is for the oil. It appears that fitting is pressed in...
Being curious, why don't I have the same issue when going in reverse?
I threw new plugs and a new bulb at it 2 weekends ago. Its a double walled one that i'm not real fond of. I'll be changing it again
93 XR6 150 OD0212925
This engine wants to bog down between 1500-2000 rpm and never pulls through it. In trying to diagnose the issue, we discovered a bad plug wire and a vacuum leak. After...
I do believe the guys who had the 35lb limit were from out of state
Being in the rubrail isn't what makes them not compliant. The fact that you can't see them from 22.5 degrees abaft is what the issue is. I don't know anyone who has gotten a ticket by having them but...
I haven't seen numbers for any of them.
Does anyone know how many lumens the bluewater leds are? I can't seem to find a number anywhere including their website.
I have to agree. I can't see how anyone could get those to the legal requirements by CG.
What are the clubs near Effingham?
no website. My buddy tested me the flier. There is an email address
Only a few spots to start out with
Can you post pics of your install? I'd be interested to see how you accomplished the 22.5 degrees abaft on each side
Is this the one that goes back and forth between Shelbyville and Clinton?
Sara will be tough too
When do you have to know by?
I guess I'm looking for a new club again. The one i was in had some issues. I chose to step away after an event last year. I guess i had to be voted back in and came up short. I live in the Effingham...