its very convenient having everything isolated to the console an stills puts our more than enough sound to hear at wot. thought about putting 6x9s in the rod boxes to go along with the 6's in the...
Type: Posts; User: xpresswes
its very convenient having everything isolated to the console an stills puts our more than enough sound to hear at wot. thought about putting 6x9s in the rod boxes to go along with the 6's in the...
Our xpress came pre done with the speakers and stereo. changed the stereo to a Dual gauge style radio in place of the speedometer and kept the Rockford Fosgate speaker which are mounted above the rod...
I run a similar setup to seapickle, 10 inch hydraulic jack plate with a 19p Stiletto at about 5850rpms. the best I have seen so far is 47.07 on the gps but average around 45-46. Just picked up a flow...
I agree, I'm currently getting 47mph out a 115 on my boat with a 10 inch plate so it would be safe to say you be getting some where between 55-60 with the 150. Personally I'd try a tempest and see...
It depends how many rpms you are turning in comparison to what kind of lift your getting with your prop. Id think that setup should be running a 23p tempest around 56-58 mph all day
That's what I've been looking for in a prop just trying to find one that can spin up high enough but still hold up the front of the boat at the same time. Still a few props in mind that I'd like to...
Going to run a 21 Raker when I can get my friends prop one day to see how it handles my typical fishing load
Went run the boat again this afternoon. Had 30 gallons of gas, 2 people, and 2 sets of tackle boxes and was able to bump right at 45mph at 5500 rpms with the stiletto. Had to run it about 3/4 of inch...
Not quiet sure which turbo it was, I borrowed it from my brother in law, but couldnt run it high on my jack plate without it slipping. But it was a mercury prop as far as I know
I'm not sure if it's the new gear ratio or not but I've been curious to how to find that out. That was the first run with that prop but with a 21 pitch turbo with 2 people and 20 gallons of gas with...
Recently me and my dad purchased a 2012 H20B with a F115 on it. So far we've rigged it with a power pole electronics and a 10" hydraulic jackplate. Just started getting the chance to start running...