My 185c was debonding in that area, turned out to be the top cap needed to be rebounded in this area. Found some seabond and stuffed it under the seam and used some flat head screws to reattach the...
Type: Posts; User: blade
My 185c was debonding in that area, turned out to be the top cap needed to be rebounded in this area. Found some seabond and stuffed it under the seam and used some flat head screws to reattach the...
I build them but I believe I’m already build one for you.
Glenn B
i have a blank panel that can be ready in a few days if your interested.
email me at heliblade@hotmail.com
I build them. Email me at heliblade@hotmail.com
Glenn
email me at heliblade@hotmail.com I can answer your questions on the bow panel for your boat.
jim
k3
these are hand built not stampede from a pastiche so they are a little more in price...
Heliblade@hotmail.com
Shoot me an email I might have one.
Heliblade@hotmail.com
Give Blade a call he can hook you up.
Heliblade@hotmail.com
Im looking for used bow panels. If you have one for sale shoot me an email please.
Heliblade@hotmail.con
Neilslure
it will fit a 2008 zx 250, it fits down inside the black trim edging.
I can fix you up when I get back home. I'm in Germany for a few weeks on vacation.
Shoot me an email at heliblade@hotmail.com
jim
I build bow panels
The pump motor went out installed a new one but found out the new one had an issue also
Checked the fuses ( they are good ), I have power to the pump but it will not run. I have also removed and reinstalled the pump motor 180 out and still does not work. I'm down to the ground in the...
2008 zx 250
i have a small issue with the full pump on the drivers side, the pump will not come on I replaced the pump and checked the power to the pump in the bilge area and I have power but the...
Wade and Skeet yes I'm still building them and yes I have one for the 2010 zx250 ( single or dual switch ) .
email me at heliblade@hotmail.com
Shoot me an email I have a few. Do you have a single or dual switch panel?
heliblade@hotmail.con
Dirt money or clean money it still spends the same..
Email me what year and model you have and Ill send you a picture (heliblade@hotmail.com). working on down sizing the pictures for here.
Ok bow panel ( the piece of plastic that breaks when you plug in your trolling motor it the big hole when you take your graph out )
Im still building skeeter replacement bow plates. If your looking for one shoot me an email at heliblade@hotmail.com
jim
133983
This the panel I installed in my sons boat. Not really hard to do, the biggest pain was cutting the fiberglass, this area is very thick.
Have you checked to see if the plastic edge is broken, our 02 broke and would let the door come open. I glued a piece of lexan to the back side of the edge and the door stays closed now.
130225
The panel installed