Thanks for all the help. It was an operations error, I had to get my daughter to show me how to copy to the SD card correctly. I got the 3.500 and then the 4.020 loaded with no issues, now to get...
Type: Posts; User: peteo
Thanks for all the help. It was an operations error, I had to get my daughter to show me how to copy to the SD card correctly. I got the 3.500 and then the 4.020 loaded with no issues, now to get...
bobcoy, I had done exactly that. I did not see anything other than 3.500. This was at Humminbird site. Is there somewhere else that provides other software updates? Thanks.
On SOLIX G1...
The Solix 12 is not even seeing the update on SD card. I figure I will wait till Monday and give Humminbird a call.
I am going to sell the Onix.
I have a Solix 12 SI and had it networked to a Onix 10. I have recently purchased a Solix 10 SI with a Software of 4.020. My 12 has a software version of 3.110 that I had to limit to network with...
Thanks Bill. I kind of figured the needle mechanicals had water get into it. There was water in the dial of the gauge when I got it back. I will get one ordered. Thanks again.
I have a 2012 DF175 with less than 300 hours. I had a dash modified and noticed that the tach would not indicate over 1000 rpm while running. All the engine lights on tach and warning beep works. ...
Is the Solix model G3 the most current? Or is there a hold up on the G4?
I had a 36v Ulterra 60in picked up and secured by Uship in So. East, Pa and delivered to my home in Springfield, IL. I believe I paid $130. I thought that was reasonable.
Ha! Ain't that the truth!
I have a df175 on the back of my Seaark, it has a 143/4-23p Suzuki SS prop. With motor trimmed up and wot I am hitting my rpm limit chip at 6100 rpm. My thoughts are that I could probably use a 24p...
I have had two 3 bank promariner's gen 2 in the last 6 years go bad. I do not know what causes them to fail. I had batteries wind up ruined at the first fail and they were wet cell batteries. This...
I am considering purchasing a crossbow this year and am looking at a Scorpyd Ventilatoror a Excalibur Equinox. Anybody have any experience with these?
Pretty Please! LoL
A 2000 200 Mod#E200fpxssh, Ser# G04861162. If you could please run these # and let me know of any history. Thanks
Looked at the 150 and it had ended with no bids. I would like to stick a 175 on boat as that is what it is rated for. Thanks!
Thanks, My new boat needs a 25 in shaft. Wish it used a 20 there are a lot of them.
I am looking for a motor for my new Procat 200. I came across this and was wondering if this is right since I have not bought a large motor since 2005 and it was used a1999 with 180 hrs. This seller...
My 2012 boat came set up with suzuki controls but no motor. I have never owned a suzuki just an evinrude 175 ficht on my old boat. Are the 2012 175 4 strokes a dependable motor? Do they have anything...
This is a strange outboard. Any idea of year?
UNUSUAL Folding Evinrude Outboard Motor in CASE
I replaced my FICHT 175 lu in Aug. of 2010. I also had a drop in performance, here is my post on 09-30-2010 at 0609. I never found out what happened or could explain the loss. Maybe my old one was...
I have a Evinrude 1999 175 ficht. I am sure that someone can tell me what I need to run diagnostics and where I can obtain the equipment. Thanks
I installed an SEI lower unit and went thru break in process as recomended. I was out running around and noticed an inability to get to my rpm of 5400 and my speed of 53 mph. I was only running...
I was hoping that one of our guru's might be able to run a query on this motor for updates or problems.
Serial #5075838, Model #E175FPLSOD Serial, 2005 175
Thanks, Pete
My trailered boat and 99 175 ficht motor were ran into resulting in a damaged prop and transom and damage to lower unit. I have lost some gear lube and notice gear lube smell and oil leaking from...
Thanks, that is what I was wondering about. I was concerned with ruining power pack or control module by having voltage discharge with no bleed. http://www.bassboatcentral.com/smileys/thumbsup2.gif