I have a 2018 520L
My Ultrex does about the same 2.7 to 2.9
Type: Posts; User: BillV_Z20
I have a 2018 520L
My Ultrex does about the same 2.7 to 2.9
Silicone the screws and brackets for the locker pistons
I had water getting in my rod lockers that way
Bill
2018 520L
I been using an ionic 125 as a cranker for around a month now and love it I have a ranger 520l with a 250 Drew gave me a great deal.
The SI means side imaging = mega
I'm using my MK 460 with 4 Ionic batteries
It's working like a charm fished a night tournament over the weekend trolling Batts were at 67% after 10hrs
And the cranker was at 81% sonars lights and...
I had to drill and tap the hot foot plate and I still need another 2"
I like to use a swing impact swimbait as a trailer
I put a brand new y cable first then replaced the transducer
Same thing is happening its frustrating
I have the same problem but I have a 15g2 at the console and 2 12g1 at the bow all with the latest software it just comes and goes as it pleases on local water not a problem but I will be on 1000...
That is a great idea my straps are fraying already 2018 520L
I had a 06 Z20 and liked it upgraded last season to a 520L and I never thought i'd say this but I miss the rails!
it does not! I just got back from a Florida trip I updated my units and still get interference on my solix 12
check the piston brackets I had that happen on my new ranger remove there screws and silicone
I'm having the same issues with my 520L I love the boat but there are a few things that are really pissing me off with a 250 ProXS 25p fury top speed is around 63 at 5500 rpm I got it up to 5800 RPM...
mine was a 520L sorry for the mix up
I just bought 1 low to mid 80's is right on
Thank you gentlemen never had to deal with the plugs before I will give it a shot.
Bill Vella
The plugs are large
I'll double check but I think they are medium
I bought a razor 3 25p from mark i'm having a hard time getting on plane I'm going to remove the plugs my question is do I remove 1 at a time and try to get on plane or all of them at once?
Ranger...
I called Power Pole there sending me a new board they do have great customer service!
Same thing is happening to me Starboard works fine with remotes Port won't budge with any remotes but works fine with my phone
I have a question I just ordered my TM 360 and I have a GPS puck for my Solix will I still need to install the heading sensor from the 360
Thanks Bill
I use that mold a lot and like the Jig head. To get a good pour light a candle and pass the mold over the flame till the cavities are black. Another trick I learned was to flux your lead with a...
I have one on my Z20. Well worth it.
Bill