So now there is a buzz coming from the trim relays when I try and trim the motor up and down. These are new relays. Still no power to anything when trying to crank it up. No beep, live well pumps not...
Type: Posts; User: legend96
So now there is a buzz coming from the trim relays when I try and trim the motor up and down. These are new relays. Still no power to anything when trying to crank it up. No beep, live well pumps not...
a 2007 Triton 20X2 with a Merc 250 xs (racing motor). While fishing I moved spots and out of nowhere my motor would not crank nor would it trim up or down. It was like I has a dead battery no noise...
a 2007 Triton 20X2 with a Merc 250 xs (racing motor). While fishing I moved spots and out of nowhere my motor would not crank nor would it trim up or down. It was like I has a dead battery no noise...
Yes. I do have a battery cut off switch for engine power on main battery cables (perko switch). The tilt/trim does not work on any switch. It makes a clicking noise at the motor when any switch is...
I do. I have the trolling motor and main power breaker. I checked it it's fine. The bilge, livewell pumps and all still work.
Motor cranked up just fine at the ramp. Also cranked up like normal after each stop to fish. Then I stopped at one last spot and it would not crank up at all. The voltage on the crank battery was...
I've got the noco gen 3 4 bank charger. I've been charging my 3 lithiums along with my crank battery for 3 years now with no issues at all.
Before I head out I use a tiny drop of dawn dish soap on a damp screen. I clean it with my fingers and dry it with a non abrasive towel.
Hey. I've got to replace my water pressure gauge. Mine has a 2 pin or 2 wire connection. I cannot find a gauge that has the connections to hook up with the stock wires. What do I need to use my stock...
I use Empirecovers.com. They always have a 60% off coupon code and have 3 or 4 different type covers for my year make and model boat. They also have a elastic/bungie bottom all the way around.
I was thinking about getting mine 3d printed then covering it in vinyl. Mine is in good shape but it would be nice to have a spare.
I have the force on a 07 20X2. I did not need a wedge.
I have a 2007 20X2. I have 3 lithium's. 2 are on the port side and one in the center between the live wells. I did set all 3 out on the port side to see if they would fit and they would have with a...
Update on the seals. Grainger carries the Trim Lok seals that seems to be a direct fit for my and other applications (2007 20X2- 2008 Tr-186). The part number is 10D087. The price for 100' is 186.66....
Hey. My compartment seals are leaking. Looking at some Trim lock brand seals. Does anyone know what size to use? Trying to find the right size to fit over the lip. If not the Trim lock brand does...
Who cant afford to eat? Are you serious?
Hey. What is the turn around time for the batteries? Are they in stock and ready to be shipped?
I have a 2007 20X2 and have no blisters. The only thing that I noticed on mine is the gas smell on the port side rod box. There is a write up in the forum on how to fix it. Mine is very faint though....
I replaced mine in December. I replaced the whole actuator. Its all about the tools you use. Snap ring pliers, flare nut wrenches, and something to knock out the pins. Slide it out and then slide the...
I own the same year and model. I love mine. I was fishing out of a buddies 06 20x, while his boat is faster by about 3 or 4 mph it makes up for it in room and ride. It is extremely comfortable and...
You should have a release lever under the tongue. Press that and it should release it.
Thanks to everyone who responded. This is where Im at as of today (1-21-21). So I ordered 2 ss wear sleeves. Mine had 2 discolored lines on them. I have a few more questions. The wear sleeves that...
Hey guys. I have a 2007 Triton 20 X2. I have I believe is the Marine Master trailer with the UFP trailer buddy Gold series hubs. I had a problem with my brake calipers sticking, it heated the rotors...
Hey guys. I have a 2007 Triton 20 X2. I have I believe is the Marine Master trailer with the UFP trailer buddy Gold series hubs. I had a problem with my brake calipers sticking, it heated the rotors...
Yours may be the same as well, but mine has 2 lights one on the moose head and one on the tube side. Also the screws on the rod tube, were they in the corners?
