Search:

Just got a deal on a set of power poles. I’m looking for a bracket recommendation (ie setback, heights, and mounting type). There are so many options I’m over whelmed. I contacted power pole and...

Good to know thanks for the info.

I just blew the 225 Yamaha on my rig. I have found a great deal on a 250 pro xs. My manufacturers plate has the max HP at 235. I figure that in 97 the 250 HP wasn’t common. I don’t want to violate...

Yes it is. Been down that road before.

Last night my son flooded the motor at the ramp. I cranked on it for awhile and decided to stop for about 1 1/2 hr. Tried it again for about 5-7 minutes off and on and I heard the sound of the motor...

I used a grinder attachment called a flap pad. It is a bunch of layers of sandpaper. My Lids are all aluminum so there was no worry of scratching them. It worked excellent and made short work of the...

I had a bad wire connector between the plug on the remote tank and the pump. Just glad it was an easy fix.

It is a 225 hpdi 04 model. Thanks for the help

I am having trouble with the oil tank on the motor not filling. I don't think the pump on the main tank is getting voltage. Any advice. Thanks

Thanks for the info. I will shoot her and email and see what I can come up with.

Has anyone converted a bench seat from a 209 to buckets seats. Just wondering how it turned out if so and what seats you used.

Mix some 30 minute epoxy in a small pop bottle cap and thin it out with denatured alcohol. Then just dip the ends and install. When it starts getting thick add more alcohol and mix again. It will dry...

I use a plastic spoon with a few holes drilled in it. Just put the base coat on and then add the splatter and bake out.

Basscatboats.com is where mine came from.

Find a shipping cover from a triton. They fit well and a local dealer sells them here for $20.

I also never had a stress crack on the rear top cap of a 97 model. That is until 2 years ago, kI lost the motor support that came with the boat and cut a corner and used the other kind, Just...

I ordered the 24 oz from bass boat seats and the pad will let you guys know how it turns out and try and post some pics when it is done.

I have been using one of the ones that just support the motor from the trim pump. I just had to replace the motor mounts because of it. From now on mine will be supported from the trailer. When the...

Thanks guys. I think that I will do the 24oz and then trim it up a little if it is really tight.

What weight of carpet can i put in a 97 209 without having trouble shutting the lids. I want 24oz but not sure if it will cause more trouble than it is worth. Thanks for the help.

I haven't been on any of the duncan lakes this year but I did win a tournament on Lawtonka back in the spring. If I were going there now I would stay in the south boat houses. They are a pretty...

Here is my baby http://www.bassboatcentral.com/smileys/bows.gif

http://bassboatcentral.com/Gamblerpics/Lank2.jpg

Me and dad after a win at Foss.
...

Lank in Tuttle
97 Gambler 209 TE, 97 Mariner 225 Super Mag